Post Stock Login Register

IS 2062 E275C vs IS 2062 E275BR

Strong Match — 99.1% match based on chemical composition and mechanical property overlap.

IS 2062 E275C (IS 2062:2011) and IS 2062 E275BR (IS 2062:2011) are both steel grades. Both fall under the Structural Steel category. IS 2062 E275C is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 E275BR is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 E275C is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 E275BR is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 E275C vs IS 2062 E275BR is a 98.6% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 99.1%.

Frequently Compared With IS 2062 E275C:
AS/NZS 1595 C350 CSA G40.21 260W CSA G40.21 300W CSA G40.21 400W ASTM A283C GOST 19281 09G2S AS/NZS 3679.1 300 AS/NZS 3679.1 350 CSA G40.21 400A CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
98.6%
MECHANICAL MATCH
100%
OVERALL
99.1%
Specifications
Property IS 2062 E275C IS 2062 E275BR
Standard IS 2062:2011 IS 2062:2011
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.22
Mn (%) <=1.50 <=1.50
Si (%) <=0.40 <=0.40
S (%) <=0.040 <=0.045
P (%) <=0.040 <=0.045
CEV (%) <=0.41 <=0.42
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E275C IS 2062 E275BR
Tensile Strength >=430 MPa >=430 MPa
Yield Strength 275 MPa (<=20mm) / 265 MPa (20-40mm) / 255 MPa (>40mm) 275 MPa (<=20mm) / 265 MPa (20-40mm) / 255 MPa (>40mm)
Elongation >=22% >=22%
Impact Energy >=27 J at -20°C >=27 J at room temperature (optional)
Typical Applications
IS 2062 E275C
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 E275BR
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 E275C Be Substituted With IS 2062 E275BR?
IS 2062 E275C and IS 2062 E275BR overlap closely enough on chemistry and mechanical properties that IS 2062 E275BR is often considered as a substitute for IS 2062 E275C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 E275C
0 active listings and RFQs →
IS 2062 E275BR
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E275C and IS 2062 E275BR?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 E275C be substituted with IS 2062 E275BR?
IS 2062 E275C and IS 2062 E275BR overlap closely enough on chemistry and mechanical properties that IS 2062 E275BR is often considered as a substitute for IS 2062 E275C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.