Post Stock Login Register

IS 2062 E450A vs CSA G40.21 400A

Related Material — 63.1% match based on chemical composition and mechanical property overlap.

IS 2062 E450A (IS 2062:2011) and CSA G40.21 400A (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. IS 2062 E450A is typically used for heavy construction equipment, bridges, mining equipment, offshore structures, high strength structural fabrication, industrial machinery, while CSA G40.21 400A is commonly used for atmospheric corrosion-resistant (weathering) structural steel; exposed bridge girders and structural members where high strength and weathering resistance are both needed. IS 2062 E450A is defined under Bureau of Indian Standards (IS), originating from India, while CSA G40.21 400A is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, IS 2062 E450A vs CSA G40.21 400A is a 94.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 63.1%.

Frequently Compared With IS 2062 E450A:
AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 480W CSA G40.21 260W CSA G40.21 400W AS/NZS 3679.1 300 CSA G40.21 300W ASTM A1008 SS Grade 50 GOST 19281 09G2S IS 2062 E250B0 ASTM A1008 SS Grade 80 IS 2062 E250A
Match Breakdown
CHEMISTRY MATCH
94.7%
MECHANICAL MATCH
0%
OVERALL
63.1%
Specifications
Property IS 2062 E450A CSA G40.21 400A
Standard IS 2062:2011 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.22 <=0.23
Mn (%) <=1.65 <=1.60
Si (%) <=0.45 <=0.40
S (%) <=0.045 <=0.035
P (%) <=0.045 <=0.035
CEV (%) <=0.52 Not specified
Cu (%) Not specified 0.20-0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E450A CSA G40.21 400A
Tensile Strength >=570 MPa 520-670 MPa
Yield Strength 450 MPa (<=20mm) / 430 MPa (20-40mm) / 420 MPa (>40mm) 400 MPa min
Elongation >=20% 17% min
Impact not required 27J at 0°C
Typical Applications
IS 2062 E450A
heavy construction equipment, bridges, mining equipment, offshore structures, high strength structural fabrication, industrial machinery
CSA G40.21 400A
Atmospheric corrosion-resistant (weathering) structural steel; exposed bridge girders and structural members where high strength and weathering resistance are both needed
Key Differences
Can IS 2062 E450A Be Substituted With CSA G40.21 400A?
IS 2062 E450A and CSA G40.21 400A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 E450A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3000–4400 mm (118.11–173.23 in)
CSA G40.21 400A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2800–4200 mm (110.24–165.35 in)
On M-EX Right Now
IS 2062 E450A
2 active listings and RFQs →
CSA G40.21 400A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E450A and CSA G40.21 400A?
IS 2062 E450A specifies CEV which is not specified for CSA G40.21 400A. CSA G40.21 400A specifies Cu which is not specified for IS 2062 E450A.
Can IS 2062 E450A be substituted with CSA G40.21 400A?
IS 2062 E450A and CSA G40.21 400A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.