Minimal Match — 54.1% match
based on chemical composition and mechanical property overlap.
IS 3195 60Cr4V2 (IS 3195:1992) and EN 10083-1 51CrV4 (EN 10083-1:1996) are both steel grades.
Both fall under the Spring Steel category.
IS 3195 60Cr4V2 is typically used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword), while EN 10083-1 51CrV4 is commonly used for quenched and tempered machine parts (clause 1.1).
IS 3195 60Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10083-1 51CrV4 is defined under European Standard (EN), originating from Europe.
As per chemical composition, IS 3195 60Cr4V2 vs EN 10083-1 51CrV4 is a 81.2% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 54.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 3195 60Cr4V2
EN 10083-1 51CrV4
Hardness, annealed
<=255 HB
Not specified
Hardness, untreated (hot rolled)
about 310 HB (for guidance only)
Not specified
Condition
Not specified
Quenched and tempered, ruling section d <= 16 mm
Elongation
Not specified
9% min
Hardness
Not specified
Soft annealed: 248 HB max
Tensile Strength
Not specified
1100 to 1300 MPa
Yield Strength
Not specified
900 MPa min
Typical Applications
IS 3195 60Cr4V2
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
EN 10083-1 51CrV4
Quenched and tempered machine parts (clause 1.1)
Can IS 3195 60Cr4V2 Be Substituted With EN 10083-1 51CrV4?
IS 3195 60Cr4V2 and EN 10083-1 51CrV4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between IS 3195 60Cr4V2 and EN 10083-1 51CrV4?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 3195 60Cr4V2 be substituted with EN 10083-1 51CrV4?
IS 3195 60Cr4V2 and EN 10083-1 51CrV4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.