Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
IS 3195 65Si7 (IS 3195:1992) and BS 970 EN42B (BS 970:1955) are both steel grades.
Both fall under the Spring Steel category.
IS 3195 65Si7 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 EN42B is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, IS 3195 65Si7 vs BS 970 EN42B is a 83.9% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 3195 65Si7
BS 970 EN42B
Hardness, annealed
<=245 HB
Not specified
Hardness, untreated (hot rolled)
about 255 HB (for guidance only)
Not specified
Typical Applications
IS 3195 65Si7
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
BS 970 EN42B
Not documented
Can IS 3195 65Si7 Be Substituted With BS 970 EN42B?
IS 3195 65Si7 and BS 970 EN42B share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between IS 3195 65Si7 and BS 970 EN42B?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 3195 65Si7 be substituted with BS 970 EN42B?
IS 3195 65Si7 and BS 970 EN42B share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.