Strong Match — 86.8% match
based on chemical composition and mechanical property overlap.
IS 3431 50Cr4V2 (IS 3431:1982) and BS 970 EN47 (BS 970:1955) are both steel grades.
Both fall under the Spring Steel category.
IS 3431 50Cr4V2 is typically used for valve springs,high performance automotive springs,aerospace springs,coil springs,torsion bars, while BS 970 EN47 is commonly used for coil springs, leaf springs, torsion bars, valve springs, suspension springs, industrial springs requiring high fatigue life..
IS 3431 50Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 EN47 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, IS 3431 50Cr4V2 vs BS 970 EN47 is a 86.8% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 86.8%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Coil springs, leaf springs, torsion bars, valve springs, suspension springs, industrial springs requiring high fatigue life.
Can IS 3431 50Cr4V2 Be Substituted With BS 970 EN47?
IS 3431 50Cr4V2 and BS 970 EN47 overlap closely enough on chemistry and mechanical properties that BS 970 EN47 is often considered as a substitute for IS 3431 50Cr4V2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 3431 50Cr4V2 and BS 970 EN47?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 3431 50Cr4V2 be substituted with BS 970 EN47?
IS 3431 50Cr4V2 and BS 970 EN47 overlap closely enough on chemistry and mechanical properties that BS 970 EN47 is often considered as a substitute for IS 3431 50Cr4V2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.