Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
IS 3431 50Cr4V2 (IS 3431:1982) and IS 3195 98C6 (IS 3195:1992) are both steel grades.
Both fall under the Spring Steel category.
IS 3431 50Cr4V2 is typically used for valve springs,high performance automotive springs,aerospace springs,coil springs,torsion bars, while IS 3195 98C6 is commonly used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword).
IS 3431 50Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India, while IS 3195 98C6 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, IS 3431 50Cr4V2 vs IS 3195 98C6 is a 77.2% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
Key Differences
IS 3431 50Cr4V2 specifies Cr, V which are not specified for IS 3195 98C6.
Can IS 3431 50Cr4V2 Be Substituted With IS 3195 98C6?
IS 3431 50Cr4V2 and IS 3195 98C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between IS 3431 50Cr4V2 and IS 3195 98C6?
IS 3431 50Cr4V2 specifies Cr, V which are not specified for IS 3195 98C6.
Can IS 3431 50Cr4V2 be substituted with IS 3195 98C6?
IS 3431 50Cr4V2 and IS 3195 98C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.