Post Stock Login Register

IS 3748:1990 T110W6Cr4 Steel: Specifications & Listings

IS 3748:1990 T110W6Cr4: T110W6Cr4: cold work tool and die steel. Specified in IS 3748:1990.

Category: Tool & Die Steels
Grade Details
GradeIS 3748:1990 T110W6Cr4
Standard IS 3748:1990
ApplicationsCold work tools and dies for blanking, trimming, chipping and shearing
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 1570 (Part 6) T110Mn4W6Cr4 IS 1570 (Part 6):1996 Close Alternative
IS 1570 (Part 6) T105W6CrV2 IS 1570 (Part 6):1996 Close Alternative
IS 1570 (Part 6) T140W15Cr2 IS 1570 (Part 6):1996 Related Material
IS 1570 (Part 6) T90Mn6WCr2 IS 1570 (Part 6):1996 Related Material
IS 3748 T90Mn6WCr2 IS 3748:1990 Related Material
IS 3748 T40W8Cr5V2 IS 3748:1990 Related Material
IS 3748 T50W8Cr5V2 IS 3748:1990 Related Material
IS 1570 (Part 6) XT33W9Cr3V4 IS 1570 (Part 6):1996 Related Material
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Si Mn Cr W S P
1.00-1.20 0.10-0.35 0.25-0.50 0.90-1.30 1.25-1.75 <=0.035 <=0.035
Mechanical Properties
Hardness <=230 HB
Condition Annealed (maximum Brinell hardness)

More data from IS 3748:1990

From the standard
Maximum hardness in annealed condition 1 condition
ConditionMaximum hardness (HB)
Annealed230
Brinell hardness tested per IS 1500; steels are supplied annealed unless specified otherwise.
Source: IS 3748:1990, Clause 9.1

Active IS 3748:1990 T110W6Cr4 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 3748:1990 T110W6Cr4 listings at this time.

Register for Alerts

Buyer RFQs for IS 3748:1990 T110W6Cr4

+ Post an RFQ for this grade

No open buyer requirements for IS 3748:1990 T110W6Cr4 at this time.

Register for Alerts