Post Stock Login Register

IS 3748 T50Cr4V2 vs IS 1570 (Part 6) T55Cr3

Close Alternative — 79.3% match based on chemical composition and mechanical property overlap.

IS 3748 T50Cr4V2 (IS 3748:1990) and IS 1570 (Part 6) T55Cr3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 3748 T50Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) T55Cr3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 3748 T50Cr4V2 vs IS 1570 (Part 6) T55Cr3 is a 79.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 79.3%.

Frequently Compared With IS 3748 T50Cr4V2:
IS 1570 (Part 6) 103T3 GB/T 1299 3Cr2W8V GB/T 1299 4Cr5MoSiV EN ISO 4957 1.2316 DIN EN ISO 4957 1.2344 DIN EN ISO 4957 1.2379 EN ISO 683-17 100Cr6 IS 3748 103T3 IS 1570 (Part 6) 118T3 IS 3748 133T3 IS 1570 (Part 6) 133T3 IS 3748 118T3
Match Breakdown
CHEMISTRY MATCH
79.3%
MECHANICAL MATCH
No shared data
OVERALL
79.3%
Specifications
Property IS 3748 T50Cr4V2 IS 1570 (Part 6) T55Cr3
Standard IS 3748:1990 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.45-0.55 0.50-0.60
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.60-0.80
Cr (%) 0.90-1.20 0.60-0.80
V (%) 0.15-0.30 Not specified
S (%) <=0.035 <=0.035
P (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 3748 T50Cr4V2 IS 1570 (Part 6) T55Cr3
Hardness <=230 HB Not specified
Condition Annealed (maximum Brinell hardness) Not specified
Typical Applications
IS 3748 T50Cr4V2
Cold work tools and dies for blanking, trimming, chipping and shearing
IS 1570 (Part 6) T55Cr3
Not documented
Key Differences
Can IS 3748 T50Cr4V2 Be Substituted With IS 1570 (Part 6) T55Cr3?
IS 3748 T50Cr4V2 and IS 1570 (Part 6) T55Cr3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 3748 T50Cr4V2
0 active listings and RFQs →
IS 1570 (Part 6) T55Cr3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 3748 T50Cr4V2 and IS 1570 (Part 6) T55Cr3?
IS 3748 T50Cr4V2 specifies V which is not specified for IS 1570 (Part 6) T55Cr3.
Can IS 3748 T50Cr4V2 be substituted with IS 1570 (Part 6) T55Cr3?
IS 3748 T50Cr4V2 and IS 1570 (Part 6) T55Cr3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.