Post Stock Login Register

IS 4367 35Mn6Mo3 vs BS 970 (Part 1) 605A37

Strong Match — 85.6% match based on chemical composition and mechanical property overlap.

IS 4367 35Mn6Mo3 (IS 4367:1991) and BS 970 (Part 1) 605A37 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Alloy Steel category. IS 4367 35Mn6Mo3 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 605A37 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 4367 35Mn6Mo3 vs BS 970 (Part 1) 605A37 is a 85.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.6%.

Frequently Compared With IS 4367 35Mn6Mo3:
NF A35-565 100C6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 UNI 11234 100Cr6 IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
85.6%
MECHANICAL MATCH
No shared data
OVERALL
85.6%
Specifications
Property IS 4367 35Mn6Mo3 BS 970 (Part 1) 605A37
Standard IS 4367:1991 BS 970 (Part 1):1983
Category Alloy Steel Alloy Steel
C (%) 0.30-0.40 0.35-0.40
Si (%) 0.10-0.35 Not specified
Mn (%) 1.30-1.80 1.30-1.70
Mo (%) 0.20-0.35 0.22-0.32
S (%) <=0.035 <=0.040
P (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4367 35Mn6Mo3 BS 970 (Part 1) 605A37
Tensile Strength 700-850 MPa Not specified
Yield Strength 540 MPa min Not specified
Elongation >=18% Not specified
Izod Impact 55 J min Not specified
Hardness 208-252 HB Not specified
Hardness (soft annealed) <=220 HB Not specified
Condition Hardened and tempered, ruling section up to 150 mm Not specified
Typical Applications
IS 4367 35Mn6Mo3
Not documented
BS 970 (Part 1) 605A37
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can IS 4367 35Mn6Mo3 Be Substituted With BS 970 (Part 1) 605A37?
IS 4367 35Mn6Mo3 and BS 970 (Part 1) 605A37 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 605A37 is often considered as a substitute for IS 4367 35Mn6Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 4367 35Mn6Mo3
0 active listings and RFQs →
BS 970 (Part 1) 605A37
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4367 35Mn6Mo3 and BS 970 (Part 1) 605A37?
IS 4367 35Mn6Mo3 specifies Si which is not specified for BS 970 (Part 1) 605A37.
Can IS 4367 35Mn6Mo3 be substituted with BS 970 (Part 1) 605A37?
IS 4367 35Mn6Mo3 and BS 970 (Part 1) 605A37 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 605A37 is often considered as a substitute for IS 4367 35Mn6Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.