Post Stock Login Register

IS 4432 13Ni13Cr3 vs EN 10028-2 10CrMo9-10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 4432 13Ni13Cr3 (IS 4432:1988) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. IS 4432 13Ni13Cr3 is typically used for forgings and fabrication of case-hardened machine or automobile parts, while EN 10028-2 10CrMo9-10 is commonly used for flat products for pressure purposes. IS 4432 13Ni13Cr3 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10028-2 10CrMo9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 4432 13Ni13Cr3 vs EN 10028-2 10CrMo9-10 is a 57.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 4432 13Ni13Cr3:
IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
57.9%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property IS 4432 13Ni13Cr3 EN 10028-2 10CrMo9-10
Standard IS 4432:1988 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.10-0.15 0.08-0.14
Si (%) 0.15-0.35 <=0.50
Mn (%) 0.40-0.70 0.40-0.80
Ni (%) 3.00-3.50 Not specified
Cr (%) 0.60-1.00 2.00-2.50
S (%) <=0.035 <=0.010
P (%) <=0.035 <=0.020
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Mo (%) Not specified 0.90-1.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4432 13Ni13Cr3 EN 10028-2 10CrMo9-10
Core Tensile Strength 1000-1300 MPa (16 mm) / 900-1250 MPa (30 mm) / 850-1200 MPa (63 mm) Not specified
Core Yield Strength >=720 MPa (16 mm) / >=650 MPa (30 mm) / >=600 MPa (63 mm) Not specified
Core Elongation >=8% (16 mm) / >=9% (30 mm) / >=10% (63 mm) Not specified
Core Reduction of Area >=35% (16 mm) / >=35% (30 mm) / >=40% (63 mm) Not specified
Hardness, annealed (A) <=217 HB Not specified
Tensile Strength Not specified 480-630 MPa
Yield Strength Not specified >=310 MPa
Elongation Not specified >=18%
Condition Not specified Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
IS 4432 13Ni13Cr3
Forgings and fabrication of case-hardened machine or automobile parts
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can IS 4432 13Ni13Cr3 Be Substituted With EN 10028-2 10CrMo9-10?
IS 4432 13Ni13Cr3 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 4432 13Ni13Cr3
0 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4432 13Ni13Cr3 and EN 10028-2 10CrMo9-10?
IS 4432 13Ni13Cr3 specifies Ni which is not specified for EN 10028-2 10CrMo9-10. EN 10028-2 10CrMo9-10 specifies N, Cu, Mo which are not specified for IS 4432 13Ni13Cr3.
Can IS 4432 13Ni13Cr3 be substituted with EN 10028-2 10CrMo9-10?
IS 4432 13Ni13Cr3 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.