Post Stock Login Register

IS 4432 14C14S14 vs BS 970 (Part 1) 210A15

Strong Match — 87% match based on chemical composition and mechanical property overlap.

IS 4432 14C14S14 (IS 4432:1988) and BS 970 (Part 1) 210A15 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Free Machining Steel category. IS 4432 14C14S14 is typically used for forgings and fabrication of case-hardened machine or automobile parts, while BS 970 (Part 1) 210A15 is commonly used for case hardening steel for mechanical and allied engineering purposes (table 11 mechanical properties).. IS 4432 14C14S14 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 210A15 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 4432 14C14S14 vs BS 970 (Part 1) 210A15 is a 87% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87%.

Frequently Compared With IS 4432 14C14S14:
IS 4432 10C8S10 IS 1570 (Part 3) 10C8S10 SAE J403 1117 SAE J403 1118 SAE J403 1117 SAE J403 1118 SAE J403 1126 SAE J403 1117 SAE J403 1118 SAE J403 1126 SAE J403 1126 SAE J403 1132
Match Breakdown
CHEMISTRY MATCH
87%
MECHANICAL MATCH
No shared data
OVERALL
87%
Specifications
Property IS 4432 14C14S14 BS 970 (Part 1) 210A15
Standard IS 4432:1988 BS 970 (Part 1):1983
Category Free Machining Steel Free Machining Steel
C (%) 0.10-0.18 0.13-0.18
Si (%) 0.10-0.35 Not specified
Mn (%) 1.20-1.50 0.90-1.20
S (%) 0.10-0.18 0.10-0.18
P (%) <=0.045 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4432 14C14S14 BS 970 (Part 1) 210A15
Core Tensile Strength 650-900 MPa (16 mm) / 600-900 MPa (30 mm) Not specified
Core Yield Strength >=430 MPa (16 mm) / >=360 MPa (30 mm) Not specified
Core Elongation >=12% (16 mm) / >=14% (30 mm) Not specified
Core Reduction of Area >=35% (16 mm) / >=40% (30 mm) Not specified
Hardness, annealed (A) <=150 HB Not specified
Typical Applications
IS 4432 14C14S14
Forgings and fabrication of case-hardened machine or automobile parts
BS 970 (Part 1) 210A15
Case hardening steel for mechanical and allied engineering purposes (Table 11 mechanical properties).
Key Differences
Can IS 4432 14C14S14 Be Substituted With BS 970 (Part 1) 210A15?
IS 4432 14C14S14 and BS 970 (Part 1) 210A15 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 210A15 is often considered as a substitute for IS 4432 14C14S14 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 4432 14C14S14
0 active listings and RFQs →
BS 970 (Part 1) 210A15
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4432 14C14S14 and BS 970 (Part 1) 210A15?
IS 4432 14C14S14 specifies Si which is not specified for BS 970 (Part 1) 210A15.
Can IS 4432 14C14S14 be substituted with BS 970 (Part 1) 210A15?
IS 4432 14C14S14 and BS 970 (Part 1) 210A15 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 210A15 is often considered as a substitute for IS 4432 14C14S14 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.