Post Stock Login Register

IS 5517 37Mn5Si5 vs IS 4367 37Mn5Si5

Close Alternative — 81.4% match based on chemical composition and mechanical property overlap.

IS 5517 37Mn5Si5 (IS 5517:1993) and IS 4367 37Mn5Si5 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. IS 5517 37Mn5Si5 is defined under Bureau of Indian Standards (IS), originating from India, while IS 4367 37Mn5Si5 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 5517 37Mn5Si5 vs IS 4367 37Mn5Si5 is a 100% match. As per mechanical properties, the match is 44.1%. Combined, this makes them a close alternative overall at 81.4%.

Frequently Compared With IS 5517 37Mn5Si5:
IS 1570 (Part 4) 103Cr6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 7) 10Mo6H IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
44.1%
OVERALL
81.4%
Specifications
Property IS 5517 37Mn5Si5 IS 4367 37Mn5Si5
Standard IS 5517:1993 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.33-0.41 0.33-0.41
Si (%) 1.10-1.40 1.10-1.40
Mn (%) 1.10-1.40 1.10-1.40
S (%) <=0.035 <=0.035
P (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 37Mn5Si5 IS 4367 37Mn5Si5
Tensile Strength 800-950 MPa 780-930 MPa
Yield Strength (0.2% proof) 550 MPa min Not specified
Elongation >=14% >=14%
Izod Impact 34 J min Not specified
Hardness (annealed) <=220 HB Not specified
Condition Hardened and tempered, ruling section up to 100 mm Hardened and tempered
Yield Strength Not specified 590 MPa min
Hardness (soft annealed) Not specified <=217 HB
Can IS 5517 37Mn5Si5 Be Substituted With IS 4367 37Mn5Si5?
IS 5517 37Mn5Si5 and IS 4367 37Mn5Si5 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 5517 37Mn5Si5
0 active listings and RFQs →
IS 4367 37Mn5Si5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 37Mn5Si5 and IS 4367 37Mn5Si5?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 5517 37Mn5Si5 be substituted with IS 4367 37Mn5Si5?
IS 5517 37Mn5Si5 and IS 4367 37Mn5Si5 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.