Post Stock Login Register

IS 5517 37Mn5Si5 vs IS 5517 46V1S3

Close Alternative — 81% match based on chemical composition and mechanical property overlap.

IS 5517 37Mn5Si5 (IS 5517:1993) and IS 5517 46V1S3 (IS 5517:1993) are both steel grades. Both fall under the Alloy Steel category. IS 5517 37Mn5Si5 is defined under Bureau of Indian Standards (IS), originating from India, while IS 5517 46V1S3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 5517 37Mn5Si5 vs IS 5517 46V1S3 is a 71.4% match. As per mechanical properties, the match is 100%. Combined, this makes them a close alternative overall at 81%.

Frequently Compared With IS 5517 37Mn5Si5:
IS 1570 (Part 4) 103Cr6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 7) 10Mo6H IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
71.4%
MECHANICAL MATCH
100%
OVERALL
81%
Specifications
Property IS 5517 37Mn5Si5 IS 5517 46V1S3
Standard IS 5517:1993 IS 5517:1993
Category Alloy Steel Alloy Steel
C (%) 0.33-0.41 0.42-0.50
Si (%) 1.10-1.40 <=0.60
Mn (%) 1.10-1.40 0.60-1.00
S (%) <=0.035 0.045-0.065
P (%) <=0.035 <=0.035
V (%) Not specified 0.08-0.13
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 37Mn5Si5 IS 5517 46V1S3
Tensile Strength 800-950 MPa Not specified
Yield Strength (0.2% proof) 550 MPa min Not specified
Elongation >=14% Not specified
Izod Impact 34 J min Not specified
Hardness (annealed) <=220 HB <=220 HB
Condition Hardened and tempered, ruling section up to 100 mm Not specified
Key Differences
Can IS 5517 37Mn5Si5 Be Substituted With IS 5517 46V1S3?
IS 5517 37Mn5Si5 and IS 5517 46V1S3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 5517 37Mn5Si5
0 active listings and RFQs →
IS 5517 46V1S3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 37Mn5Si5 and IS 5517 46V1S3?
IS 5517 46V1S3 specifies V which is not specified for IS 5517 37Mn5Si5.
Can IS 5517 37Mn5Si5 be substituted with IS 5517 46V1S3?
IS 5517 37Mn5Si5 and IS 5517 46V1S3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.