Post Stock Login Register

IS 5517 45C8 vs BS 970 (Part 1) 055M15

Minimal Match — 53% match based on chemical composition and mechanical property overlap.

IS 5517 45C8 (IS 5517:1993) and BS 970 (Part 1) 055M15 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. IS 5517 45C8 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 055M15 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 5517 45C8 vs BS 970 (Part 1) 055M15 is a 79.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 53%.

Frequently Compared With IS 5517 45C8:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 080A20 BS 970 (Part 3) 045A10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10
Match Breakdown
CHEMISTRY MATCH
79.6%
MECHANICAL MATCH
0%
OVERALL
53%
Specifications
Property IS 5517 45C8 BS 970 (Part 1) 055M15
Standard IS 5517:1993 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) 0.40-0.50 <=0.20
Si (%) 0.10-0.35 Not specified
Mn (%) 0.60-0.90 <=0.80
S (%) <=0.035 Not specified
P (%) <=0.035 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 45C8 BS 970 (Part 1) 055M15
Tensile Strength 600-750 MPa 310 MPa min
Yield Strength (0.2% proof) 380 MPa min Not specified
Elongation >=17% 25 % min
Izod Impact 41 J min Not specified
Hardness (annealed) <=207 HB Not specified
Condition Hardened and tempered, ruling section up to 100 mm As-rolled
Hardness Not specified 121 HB min
Typical Applications
IS 5517 45C8
Not documented
BS 970 (Part 1) 055M15
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
Can IS 5517 45C8 Be Substituted With BS 970 (Part 1) 055M15?
IS 5517 45C8 and BS 970 (Part 1) 055M15 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 5517 45C8
0 active listings and RFQs →
BS 970 (Part 1) 055M15
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 45C8 and BS 970 (Part 1) 055M15?
IS 5517 45C8 specifies Si, S, P which are not specified for BS 970 (Part 1) 055M15.
Can IS 5517 45C8 be substituted with BS 970 (Part 1) 055M15?
IS 5517 45C8 and BS 970 (Part 1) 055M15 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.