Post Stock Login Register

IS 5517 46V1S3 vs NF A35-565 100C6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 5517 46V1S3 (IS 5517:1993) and NF A35-565 100C6 are both steel grades. Both fall under the Alloy Steel category. IS 5517 46V1S3 is defined under Bureau of Indian Standards (IS), originating from India, while NF A35-565 100C6 is defined under Association Francaise de Normalisation (NF), originating from France.

As per chemical composition, IS 5517 46V1S3 vs NF A35-565 100C6 is a 64.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 5517 46V1S3:
SAE J404 1330 IS 1570 (Part 4) 103Cr6 IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 7) 12Cr2Mo5V2H IS 1570 (Part 7) 10Cr36Mo10H UNI 11234 100Cr6 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6
Match Breakdown
CHEMISTRY MATCH
64.1%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property IS 5517 46V1S3 NF A35-565 100C6
Standard IS 5517:1993 NF A35-565
Category Alloy Steel Alloy Steel
C (%) 0.42-0.50 0.95-1.05
Si (%) <=0.60 0.15-0.35
Mn (%) 0.60-1.00 0.25-0.45
V (%) 0.08-0.13 Not specified
S (%) 0.045-0.065 <=0.025
P (%) <=0.035 <=0.027
Cr (%) Not specified 1.35-1.65
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 46V1S3 NF A35-565 100C6
Hardness (annealed) <=220 HB Not specified
Tensile Strength Not specified 850-1100 MPa
Hardness Not specified 60-66 HRC
Typical Applications
IS 5517 46V1S3
Not documented
NF A35-565 100C6
ball bearings, roller bearings, bearing races, rollers, precision tools, wear resistant parts
Key Differences
Can IS 5517 46V1S3 Be Substituted With NF A35-565 100C6?
IS 5517 46V1S3 and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 5517 46V1S3
No active listings currently.
NF A35-565 100C6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6700–6700 mm (263.78–263.78 in)
On M-EX Right Now
IS 5517 46V1S3
0 active listings and RFQs →
NF A35-565 100C6
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 46V1S3 and NF A35-565 100C6?
IS 5517 46V1S3 specifies V which is not specified for NF A35-565 100C6. NF A35-565 100C6 specifies Cr which is not specified for IS 5517 46V1S3.
Can IS 5517 46V1S3 be substituted with NF A35-565 100C6?
IS 5517 46V1S3 and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.