Post Stock Login Register

IS 5517 58Cr4V1 vs SAE J404 5160

Close Alternative — 76.9% match based on chemical composition and mechanical property overlap.

IS 5517 58Cr4V1 (IS 5517:1993) and SAE J404 5160 (SAE J404:2009) are both steel grades. Both fall under the Alloy Steel category. IS 5517 58Cr4V1 is defined under Bureau of Indian Standards (IS), originating from India, while SAE J404 5160 is defined under SAE International, originating from United States.

As per chemical composition, IS 5517 58Cr4V1 vs SAE J404 5160 is a 76.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 76.9%.

Frequently Compared With IS 5517 58Cr4V1:
IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 12Cr2Mo5V2H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
76.9%
MECHANICAL MATCH
No shared data
OVERALL
76.9%
Specifications
Property IS 5517 58Cr4V1 SAE J404 5160
Standard IS 5517:1993 SAE J404:2009
Category Alloy Steel Alloy Steel
C (%) 0.53-0.63 0.56-0.64
Si (%) 0.15-0.50 0.15-0.35
Mn (%) 0.80-1.10 0.75-1.00
Cr (%) 0.90-1.20 0.70-0.90
V (%) 0.07-0.12 Not specified
S (%) <=0.035 <=0.040
P (%) <=0.035 <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 58Cr4V1 SAE J404 5160
Tensile Strength 980-1180 MPa Not specified
Yield Strength (0.2% proof) 735 MPa min Not specified
Elongation >=12% Not specified
Izod Impact 41 J min Not specified
Hardness (annealed) <=250 HB Not specified
Condition Hardened and tempered, ruling section up to 250 mm Not specified
Typical Applications
IS 5517 58Cr4V1
Not documented
SAE J404 5160
Automotive leaf springs, coil springs
Key Differences
Can IS 5517 58Cr4V1 Be Substituted With SAE J404 5160?
IS 5517 58Cr4V1 and SAE J404 5160 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
IS 5517 58Cr4V1
No active listings currently.
SAE J404 5160
Round Bar → (3 listings)
Diameter: 60–60 mm (2.36–2.36 in)
Length: 5200–6400 mm (204.72–251.97 in)
On M-EX Right Now
IS 5517 58Cr4V1
0 active listings and RFQs →
SAE J404 5160
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 58Cr4V1 and SAE J404 5160?
IS 5517 58Cr4V1 specifies V which is not specified for SAE J404 5160.
Can IS 5517 58Cr4V1 be substituted with SAE J404 5160?
IS 5517 58Cr4V1 and SAE J404 5160 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.