Post Stock Login Register

IS 6603 X02Cr18Ni12Mo3N vs EN 10088-1 X2CrNiMo18-15-4

Close Alternative — 83.5% match based on chemical composition and mechanical property overlap.

IS 6603 X02Cr18Ni12Mo3N (IS 6603:2024) and EN 10088-1 X2CrNiMo18-15-4 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X02Cr18Ni12Mo3N is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X2CrNiMo18-15-4 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 6603 X02Cr18Ni12Mo3N vs EN 10088-1 X2CrNiMo18-15-4 is a 83.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 83.5%.

Frequently Compared With IS 6603 X02Cr18Ni12Mo3N:
GOST 5632 08X18H10 EN 10088-1 1.4301 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
83.5%
MECHANICAL MATCH
No shared data
OVERALL
83.5%
Specifications
Property IS 6603 X02Cr18Ni12Mo3N EN 10088-1 X2CrNiMo18-15-4
Standard IS 6603:2024 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Cr (%) 16.5-19.5 17.5-19.5
Mo (%) 3.0-4.0 3.0-4.0
Ni (%) 10.5-14.0 13.0-16.0
N (%) 0.10-0.20 <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X02Cr18Ni12Mo3N EN 10088-1 X2CrNiMo18-15-4
Tensile Strength 540-740 MPa Not specified
Condition Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, rod only; Yield Strength is Rp0.2, Elongation is A (longitudinal) Not specified
Typical Applications
IS 6603 X02Cr18Ni12Mo3N
General purposes, semi-finished products, bars, wire rods and bright bars
EN 10088-1 X2CrNiMo18-15-4
Not documented
Can IS 6603 X02Cr18Ni12Mo3N Be Substituted With EN 10088-1 X2CrNiMo18-15-4?
IS 6603 X02Cr18Ni12Mo3N and EN 10088-1 X2CrNiMo18-15-4 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 6603 X02Cr18Ni12Mo3N
0 active listings and RFQs →
EN 10088-1 X2CrNiMo18-15-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X02Cr18Ni12Mo3N and EN 10088-1 X2CrNiMo18-15-4?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 6603 X02Cr18Ni12Mo3N be substituted with EN 10088-1 X2CrNiMo18-15-4?
IS 6603 X02Cr18Ni12Mo3N and EN 10088-1 X2CrNiMo18-15-4 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.