Post Stock Login Register

IS 6603 X03Cr13Ni4Mo vs EN 10088-1 X3CrNiMo17-13-3

Related Material — 66.1% match based on chemical composition and mechanical property overlap.

IS 6603 X03Cr13Ni4Mo (IS 6603:2024) and EN 10088-1 X3CrNiMo17-13-3 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X03Cr13Ni4Mo is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X3CrNiMo17-13-3 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 6603 X03Cr13Ni4Mo vs EN 10088-1 X3CrNiMo17-13-3 is a 66.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 66.1%.

Frequently Compared With IS 6603 X03Cr13Ni4Mo:
ASTM A959 25-4-4 GOST 5632 06Kh23N28 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
66.1%
MECHANICAL MATCH
No shared data
OVERALL
66.1%
Specifications
Property IS 6603 X03Cr13Ni4Mo EN 10088-1 X3CrNiMo17-13-3
Standard IS 6603:2024 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.05 <=0.05
Si (%) <=0.70 <=1.00
Mn (%) 0.50-1.00 <=2.00
P (%) <=0.040 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 12.0-14.0 16.5-18.5
Mo (%) 0.30-1.00 2.50-3.00
Ni (%) 3.5-4.5 10.5-13.0
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X03Cr13Ni4Mo EN 10088-1 X3CrNiMo17-13-3
Tensile Strength <=1100 MPa Not specified
Hardness <=320 HB Not specified
Condition Soft annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, all sizes; hardness as printed Not specified
Typical Applications
IS 6603 X03Cr13Ni4Mo
General purposes, semi-finished products, bars, wire rods and bright bars
EN 10088-1 X3CrNiMo17-13-3
Not documented
Key Differences
Can IS 6603 X03Cr13Ni4Mo Be Substituted With EN 10088-1 X3CrNiMo17-13-3?
IS 6603 X03Cr13Ni4Mo and EN 10088-1 X3CrNiMo17-13-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 6603 X03Cr13Ni4Mo
0 active listings and RFQs →
EN 10088-1 X3CrNiMo17-13-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X03Cr13Ni4Mo and EN 10088-1 X3CrNiMo17-13-3?
EN 10088-1 X3CrNiMo17-13-3 specifies N which is not specified for IS 6603 X03Cr13Ni4Mo.
Can IS 6603 X03Cr13Ni4Mo be substituted with EN 10088-1 X3CrNiMo17-13-3?
IS 6603 X03Cr13Ni4Mo and EN 10088-1 X3CrNiMo17-13-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.