Post Stock Login Register

IS 6603 X04Cr16Ni5Mo1 vs ASTM A959 XM-33

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 6603 X04Cr16Ni5Mo1 (IS 6603:2024) and ASTM A959 XM-33 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X04Cr16Ni5Mo1 is typically used for general purposes, semi-finished products, bars, wire rods and bright bars, while ASTM A959 XM-33 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). IS 6603 X04Cr16Ni5Mo1 is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 XM-33 is defined under ASTM International, originating from United States.

As per chemical composition, IS 6603 X04Cr16Ni5Mo1 vs ASTM A959 XM-33 is a 71.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 6603 X04Cr16Ni5Mo1:
GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
71.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 6603 X04Cr16Ni5Mo1 ASTM A959 XM-33
Standard IS 6603:2024 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.06 <=0.06
Si (%) <=0.70 <=0.75
Mn (%) <=1.50 <=0.75
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.020
Cr (%) 15.0-17.0 25.0-27.0
Mo (%) 0.80-1.50 0.75-1.50
Ni (%) 4.0-6.0 <=0.50
N (%) >=0.020 <=0.040
Cu (%) Not specified <=0.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X04Cr16Ni5Mo1 ASTM A959 XM-33
Tensile Strength <=1100 MPa Not specified
Hardness <=320 HB Not specified
Condition Soft annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, all sizes; hardness as printed Not specified
Typical Applications
IS 6603 X04Cr16Ni5Mo1
General purposes, semi-finished products, bars, wire rods and bright bars
ASTM A959 XM-33
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can IS 6603 X04Cr16Ni5Mo1 Be Substituted With ASTM A959 XM-33?
IS 6603 X04Cr16Ni5Mo1 and ASTM A959 XM-33 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 6603 X04Cr16Ni5Mo1
0 active listings and RFQs →
ASTM A959 XM-33
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X04Cr16Ni5Mo1 and ASTM A959 XM-33?
ASTM A959 XM-33 specifies Cu which is not specified for IS 6603 X04Cr16Ni5Mo1.
Can IS 6603 X04Cr16Ni5Mo1 be substituted with ASTM A959 XM-33?
IS 6603 X04Cr16Ni5Mo1 and ASTM A959 XM-33 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.