Strong Match — 97.2% match
based on chemical composition and mechanical property overlap.
IS 6603 X04Cr18Ni12Mo3 (IS 6603:2024) and ASTM A959 317 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
IS 6603 X04Cr18Ni12Mo3 is typically used for general purposes, semi-finished products, bars, wire rods and bright bars, while ASTM A959 317 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1).
IS 6603 X04Cr18Ni12Mo3 is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 317 is defined under ASTM International, originating from United States.
As per chemical composition, IS 6603 X04Cr18Ni12Mo3 vs ASTM A959 317 is a 97.2% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 97.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 6603 X04Cr18Ni12Mo3
ASTM A959 317
Tensile Strength
>=515 MPa
Not specified
Yield Strength
>=205 MPa
Not specified
Elongation
>=40%
Not specified
Condition
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, all sizes; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Not specified
Typical Applications
IS 6603 X04Cr18Ni12Mo3
General purposes, semi-finished products, bars, wire rods and bright bars
ASTM A959 317
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
IS 6603 X04Cr18Ni12Mo3 specifies N which is not specified for ASTM A959 317.
Can IS 6603 X04Cr18Ni12Mo3 Be Substituted With ASTM A959 317?
IS 6603 X04Cr18Ni12Mo3 and ASTM A959 317 overlap closely enough on chemistry and mechanical properties that ASTM A959 317 is often considered as a substitute for IS 6603 X04Cr18Ni12Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 6603 X04Cr18Ni12Mo3 and ASTM A959 317?
IS 6603 X04Cr18Ni12Mo3 specifies N which is not specified for ASTM A959 317.
Can IS 6603 X04Cr18Ni12Mo3 be substituted with ASTM A959 317?
IS 6603 X04Cr18Ni12Mo3 and ASTM A959 317 overlap closely enough on chemistry and mechanical properties that ASTM A959 317 is often considered as a substitute for IS 6603 X04Cr18Ni12Mo3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.