Post Stock Login Register

IS 6603 X05Cr16Ni4CuNb vs EN 10088-1 X4CrNiMo16-5-1

Close Alternative — 70.3% match based on chemical composition and mechanical property overlap.

IS 6603 X05Cr16Ni4CuNb (IS 6603:2024) and EN 10088-1 X4CrNiMo16-5-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X05Cr16Ni4CuNb is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X4CrNiMo16-5-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 6603 X05Cr16Ni4CuNb vs EN 10088-1 X4CrNiMo16-5-1 is a 70.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 70.3%.

Frequently Compared With IS 6603 X05Cr16Ni4CuNb:
EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
70.3%
MECHANICAL MATCH
No shared data
OVERALL
70.3%
Specifications
Property IS 6603 X05Cr16Ni4CuNb EN 10088-1 X4CrNiMo16-5-1
Standard IS 6603:2024 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.06
Si (%) <=0.70 <=0.70
Mn (%) <=1.50 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.015
Cr (%) 15.0-17.0 15.0-17.0
Mo (%) <=0.60 0.80-1.50
Ni (%) 3.0-5.0 4.0-6.0
Cu (%) 3.0-5.0 Not specified
Nb (%) <=0.45 Not specified
N (%) Not specified >=0.020
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X05Cr16Ni4CuNb EN 10088-1 X4CrNiMo16-5-1
Tensile Strength <=1200 MPa Not specified
Hardness <=363 HB Not specified
Condition Solution annealed (+AT), conditions 1C, 1E, 1D, 1X, 1G and 2D; hardness as printed Not specified
Typical Applications
IS 6603 X05Cr16Ni4CuNb
General purposes, semi-finished products, bars, wire rods and bright bars
EN 10088-1 X4CrNiMo16-5-1
Not documented
Key Differences
Can IS 6603 X05Cr16Ni4CuNb Be Substituted With EN 10088-1 X4CrNiMo16-5-1?
IS 6603 X05Cr16Ni4CuNb and EN 10088-1 X4CrNiMo16-5-1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 6603 X05Cr16Ni4CuNb
0 active listings and RFQs →
EN 10088-1 X4CrNiMo16-5-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X05Cr16Ni4CuNb and EN 10088-1 X4CrNiMo16-5-1?
IS 6603 X05Cr16Ni4CuNb specifies Cu, Nb which are not specified for EN 10088-1 X4CrNiMo16-5-1. EN 10088-1 X4CrNiMo16-5-1 specifies N which is not specified for IS 6603 X05Cr16Ni4CuNb.
Can IS 6603 X05Cr16Ni4CuNb be substituted with EN 10088-1 X4CrNiMo16-5-1?
IS 6603 X05Cr16Ni4CuNb and EN 10088-1 X4CrNiMo16-5-1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.