Post Stock Login Register

IS 6911 X10Cr18Mn9Ni5 vs EN 10088-1 X12CrMnNiN17-7-5

Close Alternative — 78.6% match based on chemical composition and mechanical property overlap.

IS 6911 X10Cr18Mn9Ni5 (IS 6911:1992) and EN 10088-1 X12CrMnNiN17-7-5 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. IS 6911 X10Cr18Mn9Ni5 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X12CrMnNiN17-7-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 6911 X10Cr18Mn9Ni5 vs EN 10088-1 X12CrMnNiN17-7-5 is a 78.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 78.6%.

Frequently Compared With IS 6911 X10Cr18Mn9Ni5:
ASTM A959 202 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH EN 10088-1 1.4301
Match Breakdown
CHEMISTRY MATCH
78.6%
MECHANICAL MATCH
No shared data
OVERALL
78.6%
Specifications
Property IS 6911 X10Cr18Mn9Ni5 EN 10088-1 X12CrMnNiN17-7-5
Standard IS 6911:1992 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Cr (%) 17.0-19.0 16.0-18.0
Mn (%) 8.0-10.0 5.5-7.5
Ni (%) 4.0-6.0 3.5-5.5
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Si (%) <=1.0 <=1.00
N (%) Not specified 0.05-0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6911 X10Cr18Mn9Ni5 EN 10088-1 X12CrMnNiN17-7-5
Bend Test (180 deg) Not required Not specified
Elongation (50 mm, annealed) >=40% Not specified
Hardness (annealed, max) 217 HBS, 95 HRB Not specified
Tensile Strength (annealed) >=620 MPa Not specified
Yield Strength (0.2% proof, annealed) >=310 MPa Not specified
Typical Applications
IS 6911 X10Cr18Mn9Ni5
Stainless and heat-resisting steel plate, sheet and strip (clause 1.1)
EN 10088-1 X12CrMnNiN17-7-5
Not documented
Key Differences
Can IS 6911 X10Cr18Mn9Ni5 Be Substituted With EN 10088-1 X12CrMnNiN17-7-5?
IS 6911 X10Cr18Mn9Ni5 and EN 10088-1 X12CrMnNiN17-7-5 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 6911 X10Cr18Mn9Ni5
0 active listings and RFQs →
EN 10088-1 X12CrMnNiN17-7-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6911 X10Cr18Mn9Ni5 and EN 10088-1 X12CrMnNiN17-7-5?
EN 10088-1 X12CrMnNiN17-7-5 specifies N which is not specified for IS 6911 X10Cr18Mn9Ni5.
Can IS 6911 X10Cr18Mn9Ni5 be substituted with EN 10088-1 X12CrMnNiN17-7-5?
IS 6911 X10Cr18Mn9Ni5 and EN 10088-1 X12CrMnNiN17-7-5 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.