Post Stock Login Register

IS 6911 X15Cr24Ni13 vs IS 1570 (Part 7) 12Cr12MoVH

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 6911 X15Cr24Ni13 (IS 6911:1992) and IS 1570 (Part 7) 12Cr12MoVH (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. IS 6911 X15Cr24Ni13 is typically used for stainless and heat-resisting steel plate, sheet and strip (clause 1.1), while IS 1570 (Part 7) 12Cr12MoVH is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. IS 6911 X15Cr24Ni13 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 7) 12Cr12MoVH is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 6911 X15Cr24Ni13 vs IS 1570 (Part 7) 12Cr12MoVH is a 56.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 6911 X15Cr24Ni13:
GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 EN 10088-1 1.4401 GOST 5632 12Kh13
Match Breakdown
CHEMISTRY MATCH
56.5%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property IS 6911 X15Cr24Ni13 IS 1570 (Part 7) 12Cr12MoVH
Standard IS 6911:1992 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) <=0.20 0.08-0.16
Cr (%) 22.0-25.0 11.5-13.00
Mn (%) <=2.0 0.40-1.00
Ni (%) 11.0-15.0 <=1.0
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.035
Si (%) <=1.5 <=0.60
Mo (%) Not specified 0.40-0.80
V (%) Not specified 0.10-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6911 X15Cr24Ni13 IS 1570 (Part 7) 12Cr12MoVH
Bend Test (180 deg) Not required Not specified
Elongation (50 mm, annealed) >=40% Not specified
Hardness (annealed, max) 217 HBS, 95 HRB Not specified
Tensile Strength (annealed) >=490 MPa Not specified
Yield Strength (0.2% proof, annealed) >=210 MPa Not specified
Tensile Strength Not specified 770-930 MPa
Yield Strength Not specified >=585 MPa (0.2 % proof stress)
Elongation Not specified >=15%
Condition Not specified Bars, forgings, Q+T, thickness up to 150 (first row of Table 3)
Typical Applications
IS 6911 X15Cr24Ni13
Stainless and heat-resisting steel plate, sheet and strip (clause 1.1)
IS 1570 (Part 7) 12Cr12MoVH
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can IS 6911 X15Cr24Ni13 Be Substituted With IS 1570 (Part 7) 12Cr12MoVH?
IS 6911 X15Cr24Ni13 and IS 1570 (Part 7) 12Cr12MoVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 6911 X15Cr24Ni13
0 active listings and RFQs →
IS 1570 (Part 7) 12Cr12MoVH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6911 X15Cr24Ni13 and IS 1570 (Part 7) 12Cr12MoVH?
IS 1570 (Part 7) 12Cr12MoVH specifies Mo, V which are not specified for IS 6911 X15Cr24Ni13.
Can IS 6911 X15Cr24Ni13 be substituted with IS 1570 (Part 7) 12Cr12MoVH?
IS 6911 X15Cr24Ni13 and IS 1570 (Part 7) 12Cr12MoVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.