Post Stock Login Register

JIS G3506 S60C vs BS 970 EN43D

Strong Match — 87.1% match based on chemical composition and mechanical property overlap.

JIS G3506 S60C (JIS G3506:2004) and BS 970 EN43D (BS 970:1955) are both steel grades. Both fall under the Carbon Steel category. JIS G3506 S60C is defined under Japanese Industrial Standards (JIS), originating from Japan, while BS 970 EN43D is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, JIS G3506 S60C vs BS 970 EN43D is a 87.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.1%.

Frequently Compared With JIS G3506 S60C:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32
Match Breakdown
CHEMISTRY MATCH
87.1%
MECHANICAL MATCH
No shared data
OVERALL
87.1%
Specifications
Property JIS G3506 S60C BS 970 EN43D
Standard JIS G3506:2004 BS 970:1955
Category Carbon Steel Carbon Steel
C (%) 0.59-0.66 0.60-0.65
Si (%) 0.15-0.35 0.05-0.35
Mn (%) 0.60-0.90 0.40-0.60
P (%) <=0.030 <=0.060
S (%) <=0.030 <=0.060
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G3506 S60C BS 970 EN43D
Tensile Strength 700-880 MPa Not specified
Yield Strength 390 MPa min Not specified
Elongation 12% min Not specified
Hardness 190-255 HB Not specified
Typical Applications
JIS G3506 S60C
Used in springs, shafts, hand tools, gears, rollers, and wear resistant machine components.
BS 970 EN43D
Not documented
Can JIS G3506 S60C Be Substituted With BS 970 EN43D?
JIS G3506 S60C and BS 970 EN43D overlap closely enough on chemistry and mechanical properties that BS 970 EN43D is often considered as a substitute for JIS G3506 S60C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
JIS G3506 S60C
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5600–7000 mm (220.47–275.59 in)
BS 970 EN43D
No active listings currently.
On M-EX Right Now
JIS G3506 S60C
2 active listings and RFQs →
BS 970 EN43D
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G3506 S60C and BS 970 EN43D?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G3506 S60C be substituted with BS 970 EN43D?
JIS G3506 S60C and BS 970 EN43D overlap closely enough on chemistry and mechanical properties that BS 970 EN43D is often considered as a substitute for JIS G3506 S60C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.