Post Stock Login Register

JIS G4104 SCr440 vs IS 1570 (Part 4) 10Cr20Mo6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

JIS G4104 SCr440 (JIS G 4104:1979) and IS 1570 (Part 4) 10Cr20Mo6 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. JIS G4104 SCr440 is defined under Japanese Industrial Standards (JIS), originating from Japan, while IS 1570 (Part 4) 10Cr20Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, JIS G4104 SCr440 vs IS 1570 (Part 4) 10Cr20Mo6 is a 57% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With JIS G4104 SCr440:
NF A35-565 100C6 UNI 11234 100Cr6 GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
57%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property JIS G4104 SCr440 IS 1570 (Part 4) 10Cr20Mo6
Standard JIS G 4104:1979 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.38-0.43 <=0.15
Si (%) 0.15-0.35 <=0.50
Mn (%) 0.60-0.85 0.40-0.70
P (%) 0.030 max Not specified
S (%) 0.030 max Not specified
Cr (%) 0.90-1.20 4.0-6.0
Ni (%) Not specified <=0.30
Mo (%) Not specified 0.45-0.65
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4104 SCr440 IS 1570 (Part 4) 10Cr20Mo6
Tensile Strength 800-950 MPa Not specified
Yield Strength 590 MPa min Not specified
Elongation 13% min Not specified
Hardness 230-285 HB Not specified
Typical Applications
JIS G4104 SCr440
Used in gears, shafts, bolts, spindles, couplings, and machine structural parts.
IS 1570 (Part 4) 10Cr20Mo6
Not documented
Key Differences
Can JIS G4104 SCr440 Be Substituted With IS 1570 (Part 4) 10Cr20Mo6?
JIS G4104 SCr440 and IS 1570 (Part 4) 10Cr20Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4104 SCr440
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4500–6100 mm (177.17–240.16 in)
IS 1570 (Part 4) 10Cr20Mo6
No active listings currently.
On M-EX Right Now
JIS G4104 SCr440
2 active listings and RFQs →
IS 1570 (Part 4) 10Cr20Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4104 SCr440 and IS 1570 (Part 4) 10Cr20Mo6?
JIS G4104 SCr440 specifies P, S which are not specified for IS 1570 (Part 4) 10Cr20Mo6. IS 1570 (Part 4) 10Cr20Mo6 specifies Ni, Mo which are not specified for JIS G4104 SCr440.
Can JIS G4104 SCr440 be substituted with IS 1570 (Part 4) 10Cr20Mo6?
JIS G4104 SCr440 and IS 1570 (Part 4) 10Cr20Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.