Post Stock Login Register

JIS G4303 SUS310S vs GOST 5632 06Kh23N28

Related Material — 56.9% match based on chemical composition and mechanical property overlap.

JIS G4303 SUS310S (JIS G4303:2021) and GOST 5632 06Kh23N28 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4303 SUS310S is typically used for furnace parts, heat treatment baskets, kiln components, while GOST 5632 06Kh23N28 is commonly used for furnace components, heat exchangers, high temperature applications. JIS G4303 SUS310S is defined under Japanese Industrial Standards (JIS) (Japan).

As per chemical composition, JIS G4303 SUS310S vs GOST 5632 06Kh23N28 is a 85.4% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 56.9%.

Frequently Compared With JIS G4303 SUS310S:
EN 10088-1 1.4845 EN 10088-1 1.4301 GOST 5632 08X18H10 GOST 5632 12Kh13 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4401 ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
85.4%
MECHANICAL MATCH
0%
OVERALL
56.9%
Specifications
Property JIS G4303 SUS310S GOST 5632 06Kh23N28
Standard JIS G4303:2021 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) ≤0.08 ≤0.06
Si (%) ≤1.50 ≤0.80
Mn (%) ≤2.00 ≤2.00
Cr (%) 24.0–26.0 22.0–25.0
Ni (%) 19.0–22.0 26.0–29.0
P (%) ≤0.040 Not specified
S (%) ≤0.030 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4303 SUS310S GOST 5632 06Kh23N28
Tensile Strength ≥520 MPa ≥510 MPa
Yield Strength ≥205 MPa ≥196 MPa
Elongation ≥40% ≥35%
Max Service Temp 1100°C 1050°C
Typical Applications
JIS G4303 SUS310S
Furnace parts, heat treatment baskets, kiln components
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
Key Differences
Can JIS G4303 SUS310S Be Substituted With GOST 5632 06Kh23N28?
JIS G4303 SUS310S and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4303 SUS310S
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3200 mm (98.43–125.98 in)
GOST 5632 06Kh23N28
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3100–3400 mm (122.05–133.86 in)
On M-EX Right Now
JIS G4303 SUS310S
3 active listings and RFQs →
GOST 5632 06Kh23N28
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4303 SUS310S and GOST 5632 06Kh23N28?
JIS G4303 SUS310S specifies P, S which are not specified for GOST 5632 06Kh23N28.
Can JIS G4303 SUS310S be substituted with GOST 5632 06Kh23N28?
JIS G4303 SUS310S and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.