Post Stock Login Register

JIS G4304 SUS304LN vs EN 10088-1 1.4301

Minimal Match — 48.1% match based on chemical composition and mechanical property overlap.

JIS G4304 SUS304LN (JIS G4304:2021) and EN 10088-1 1.4301 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4304 SUS304LN is typically used for hot-rolled stainless steel plates and strips, while EN 10088-1 1.4301 is commonly used for food equipment, chemical vessels, architectural, kitchenware. JIS G4304 SUS304LN is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 1.4301 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4304 SUS304LN vs EN 10088-1 1.4301 is a 72.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 48.1%.

Frequently Compared With JIS G4304 SUS304LN:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
72.1%
MECHANICAL MATCH
0%
OVERALL
48.1%
Specifications
Property JIS G4304 SUS304LN EN 10088-1 1.4301
Standard JIS G4304:2021 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 ≤0.07
Si (%) <=1.00 ≤1.00
Mn (%) <=2.00 ≤2.00
P (%) <=0.045 ≤0.045
S (%) <=0.030 ≤0.030
Ni (%) 8.50-11.50 8.0–10.5
Cr (%) 17.00-19.00 17.5–19.5
N (%) 0.12-0.22 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4304 SUS304LN EN 10088-1 1.4301
Tensile Strength >=550 MPa ≥520 MPa
Yield Strength >=245 MPa ≥210 MPa
Elongation >=40% ≥45%
Hardness <=217 HB ≤215 HB
Condition Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4304 SUS304LN
Hot-rolled stainless steel plates and strips
EN 10088-1 1.4301
Food equipment, chemical vessels, architectural, kitchenware
Key Differences
Can JIS G4304 SUS304LN Be Substituted With EN 10088-1 1.4301?
JIS G4304 SUS304LN and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4304 SUS304LN
No active listings currently.
EN 10088-1 1.4301
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3300 mm (98.43–129.92 in)
On M-EX Right Now
JIS G4304 SUS304LN
0 active listings and RFQs →
EN 10088-1 1.4301
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4304 SUS304LN and EN 10088-1 1.4301?
JIS G4304 SUS304LN specifies N which is not specified for EN 10088-1 1.4301.
Can JIS G4304 SUS304LN be substituted with EN 10088-1 1.4301?
JIS G4304 SUS304LN and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.