Post Stock Login Register

JIS G4304 SUS436J1L vs EN 10088-1 X2CrTi21

Close Alternative — 71.1% match based on chemical composition and mechanical property overlap.

JIS G4304 SUS436J1L (JIS G4304:2021) and EN 10088-1 X2CrTi21 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4304 SUS436J1L is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 X2CrTi21 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4304 SUS436J1L vs EN 10088-1 X2CrTi21 is a 71.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 71.1%.

Frequently Compared With JIS G4304 SUS436J1L:
EN 10088-1 1.4006 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
71.1%
MECHANICAL MATCH
No shared data
OVERALL
71.1%
Specifications
Property JIS G4304 SUS436J1L EN 10088-1 X2CrTi21
Standard JIS G4304:2021 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.025 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.050
S (%) <=0.030 <=0.050
Cr (%) 17.00-20.00 19.0-22.0
Mo (%) 0.40-0.80 <=0.50
N (%) <=0.025 Not specified
Ni (%) <=0.60 <=0.50
Ti (%) <=0.80 Not specified
Cu (%) Not specified <=0.50
Al (%) Not specified <=0.05
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4304 SUS436J1L EN 10088-1 X2CrTi21
Tensile Strength >=410 MPa Not specified
Yield Strength >=245 MPa Not specified
Elongation >=20% Not specified
Hardness <=192 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4304 SUS436J1L
Hot-rolled stainless steel plates and strips
EN 10088-1 X2CrTi21
Not documented
Key Differences
Can JIS G4304 SUS436J1L Be Substituted With EN 10088-1 X2CrTi21?
JIS G4304 SUS436J1L and EN 10088-1 X2CrTi21 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
JIS G4304 SUS436J1L
0 active listings and RFQs →
EN 10088-1 X2CrTi21
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4304 SUS436J1L and EN 10088-1 X2CrTi21?
JIS G4304 SUS436J1L specifies N, Ti which are not specified for EN 10088-1 X2CrTi21. EN 10088-1 X2CrTi21 specifies Cu, Al which are not specified for JIS G4304 SUS436J1L.
Can JIS G4304 SUS436J1L be substituted with EN 10088-1 X2CrTi21?
JIS G4304 SUS436J1L and EN 10088-1 X2CrTi21 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.