Post Stock Login Register

JIS G4304 SUS445J1 vs EN 10088-1 X2CrTi24

Close Alternative — 77.8% match based on chemical composition and mechanical property overlap.

JIS G4304 SUS445J1 (JIS G4304:2021) and EN 10088-1 X2CrTi24 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4304 SUS445J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 X2CrTi24 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4304 SUS445J1 vs EN 10088-1 X2CrTi24 is a 77.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 77.8%.

Frequently Compared With JIS G4304 SUS445J1:
IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006
Match Breakdown
CHEMISTRY MATCH
77.8%
MECHANICAL MATCH
No shared data
OVERALL
77.8%
Specifications
Property JIS G4304 SUS445J1 EN 10088-1 X2CrTi24
Standard JIS G4304:2021 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.025 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.050
S (%) <=0.030 <=0.050
Cr (%) 21.00-24.00 22.0-25.0
Mo (%) 0.70-1.50 <=0.50
N (%) <=0.025 Not specified
Ni (%) <=0.60 <=0.50
Cu (%) Not specified <=0.50
Al (%) Not specified <=0.05
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4304 SUS445J1 EN 10088-1 X2CrTi24
Tensile Strength >=410 MPa Not specified
Yield Strength >=245 MPa Not specified
Elongation >=20% Not specified
Hardness <=217 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4304 SUS445J1
Hot-rolled stainless steel plates and strips
EN 10088-1 X2CrTi24
Not documented
Key Differences
Can JIS G4304 SUS445J1 Be Substituted With EN 10088-1 X2CrTi24?
JIS G4304 SUS445J1 and EN 10088-1 X2CrTi24 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
JIS G4304 SUS445J1
0 active listings and RFQs →
EN 10088-1 X2CrTi24
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4304 SUS445J1 and EN 10088-1 X2CrTi24?
JIS G4304 SUS445J1 specifies N which is not specified for EN 10088-1 X2CrTi24. EN 10088-1 X2CrTi24 specifies Cu, Al which are not specified for JIS G4304 SUS445J1.
Can JIS G4304 SUS445J1 be substituted with EN 10088-1 X2CrTi24?
JIS G4304 SUS445J1 and EN 10088-1 X2CrTi24 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.