Strong Match — 100% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS304 (JIS G4305:2012) and KS D3566 STS304 (KS D3566:2021) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS304 is typically used for cold-rolled stainless steel plates, sheet and strip, while KS D3566 STS304 is commonly used for chemical equipment, food processing machinery, kitchen equipment, architectural applications, storage tanks..
JIS G4305 SUS304 is defined under Japanese Industrial Standards (JIS), originating from Japan, while KS D3566 STS304 is defined under Korean Industrial Standards (KS), originating from South Korea.
As per chemical composition, JIS G4305 SUS304 vs KS D3566 STS304 is a 100% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 100%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS304
KS D3566 STS304
Tensile Strength
>=520 MPa
520 MPa min
Yield Strength
>=205 MPa
Not specified
Elongation
>=40%
40% min
Hardness
<=187 HB
HB 187 max
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Not specified
Yield Strength (0.2% proof)
Not specified
205 MPa min
Typical Applications
JIS G4305 SUS304
Cold-rolled stainless steel plates, sheet and strip
Can JIS G4305 SUS304 Be Substituted With KS D3566 STS304?
JIS G4305 SUS304 and KS D3566 STS304 overlap closely enough on chemistry and mechanical properties that KS D3566 STS304 is often considered as a substitute for JIS G4305 SUS304 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between JIS G4305 SUS304 and KS D3566 STS304?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS304 be substituted with KS D3566 STS304?
JIS G4305 SUS304 and KS D3566 STS304 overlap closely enough on chemistry and mechanical properties that KS D3566 STS304 is often considered as a substitute for JIS G4305 SUS304 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.