Post Stock Login Register

JIS G4305 SUS304J1 vs EN 10088-1 X5CrNi17-7

Close Alternative — 83.7% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS304J1 (JIS G4305:2012) and EN 10088-1 X5CrNi17-7 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS304J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 X5CrNi17-7 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4305 SUS304J1 vs EN 10088-1 X5CrNi17-7 is a 83.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 83.7%.

Frequently Compared With JIS G4305 SUS304J1:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
83.7%
MECHANICAL MATCH
No shared data
OVERALL
83.7%
Specifications
Property JIS G4305 SUS304J1 EN 10088-1 X5CrNi17-7
Standard JIS G4305:2012 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.07
Si (%) <=1.70 <=1.00
Mn (%) <=3.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Ni (%) 6.00-9.00 6.0-8.0
Cr (%) 15.00-18.00 16.0-18.0
Cu (%) 1.00-3.00 Not specified
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS304J1 EN 10088-1 X5CrNi17-7
Tensile Strength >=450 MPa Not specified
Yield Strength >=155 MPa Not specified
Elongation >=40% Not specified
Hardness <=187 HB Not specified
Condition Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS304J1
Cold-rolled stainless steel plates, sheet and strip
EN 10088-1 X5CrNi17-7
Not documented
Key Differences
Can JIS G4305 SUS304J1 Be Substituted With EN 10088-1 X5CrNi17-7?
JIS G4305 SUS304J1 and EN 10088-1 X5CrNi17-7 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
JIS G4305 SUS304J1
0 active listings and RFQs →
EN 10088-1 X5CrNi17-7
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS304J1 and EN 10088-1 X5CrNi17-7?
JIS G4305 SUS304J1 specifies Cu which is not specified for EN 10088-1 X5CrNi17-7. EN 10088-1 X5CrNi17-7 specifies N which is not specified for JIS G4305 SUS304J1.
Can JIS G4305 SUS304J1 be substituted with EN 10088-1 X5CrNi17-7?
JIS G4305 SUS304J1 and EN 10088-1 X5CrNi17-7 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.