Strong Match — 88.4% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS304LN (JIS G4305:2012) and ASTM A959 304LHN (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS304LN is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A959 304LHN is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1).
JIS G4305 SUS304LN is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 304LHN is defined under ASTM International, originating from United States.
As per chemical composition, JIS G4305 SUS304LN vs ASTM A959 304LHN is a 88.4% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 88.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS304LN
ASTM A959 304LHN
Tensile Strength
>=550 MPa
Not specified
Yield Strength
>=245 MPa
Not specified
Elongation
>=40%
Not specified
Hardness
<=217 HB
Not specified
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Not specified
Typical Applications
JIS G4305 SUS304LN
Cold-rolled stainless steel plates, sheet and strip
ASTM A959 304LHN
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can JIS G4305 SUS304LN Be Substituted With ASTM A959 304LHN?
JIS G4305 SUS304LN and ASTM A959 304LHN overlap closely enough on chemistry and mechanical properties that ASTM A959 304LHN is often considered as a substitute for JIS G4305 SUS304LN in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between JIS G4305 SUS304LN and ASTM A959 304LHN?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS304LN be substituted with ASTM A959 304LHN?
JIS G4305 SUS304LN and ASTM A959 304LHN overlap closely enough on chemistry and mechanical properties that ASTM A959 304LHN is often considered as a substitute for JIS G4305 SUS304LN in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.