Strong Match — 90.7% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS317LN (JIS G4305:2012) and ASTM A240/A240M S31753 (ASTM A240/A240M:2025) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS317LN is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A240/A240M S31753 is commonly used for pressure vessels and general applications (plate, sheet and strip).
JIS G4305 SUS317LN is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A240/A240M S31753 is defined under ASTM International, originating from United States.
As per chemical composition, JIS G4305 SUS317LN vs ASTM A240/A240M S31753 is a 98.6% match.
As per mechanical properties, the match is 75%.
Combined, this makes them a strong match overall at 90.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS317LN
ASTM A240/A240M S31753
Tensile Strength
>=550 MPa
>=550 MPa
Yield Strength
>=245 MPa
>=240 MPa
Elongation
>=40%
>=40%
Hardness
<=217 HB
<=217 HB
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
JIS G4305 SUS317LN
Cold-rolled stainless steel plates, sheet and strip
ASTM A240/A240M S31753
Pressure vessels and general applications (plate, sheet and strip)
Can JIS G4305 SUS317LN Be Substituted With ASTM A240/A240M S31753?
JIS G4305 SUS317LN and ASTM A240/A240M S31753 overlap closely enough on chemistry and mechanical properties that ASTM A240/A240M S31753 is often considered as a substitute for JIS G4305 SUS317LN in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between JIS G4305 SUS317LN and ASTM A240/A240M S31753?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS317LN be substituted with ASTM A240/A240M S31753?
JIS G4305 SUS317LN and ASTM A240/A240M S31753 overlap closely enough on chemistry and mechanical properties that ASTM A240/A240M S31753 is often considered as a substitute for JIS G4305 SUS317LN in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.