Post Stock Login Register

JIS G4305 SUS329J1 vs EN 10088-1 X5CrNiMo17-12-2

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS329J1 (JIS G4305:2012) and EN 10088-1 X5CrNiMo17-12-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS329J1 is typically used for cold-rolled stainless steel plates, sheet and strip, while EN 10088-1 X5CrNiMo17-12-2 is commonly used for marine, chemical, pharmaceutical equipment. JIS G4305 SUS329J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 X5CrNiMo17-12-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4305 SUS329J1 vs EN 10088-1 X5CrNiMo17-12-2 is a 70.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With JIS G4305 SUS329J1:
IS 1570 (Part 7) 12Cr13H ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
70.2%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property JIS G4305 SUS329J1 EN 10088-1 X5CrNiMo17-12-2
Standard JIS G4305:2012 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.07
Si (%) <=1.00 <=1.00
Mn (%) <=1.50 <=2.00
P (%) <=0.040 <=0.045
S (%) <=0.030 <=0.015
Ni (%) 3.00-6.00 10.0-13.0
Cr (%) 23.00-28.00 16.5-18.5
Mo (%) 1.00-3.00 2.00-2.50
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS329J1 EN 10088-1 X5CrNiMo17-12-2
Tensile Strength >=590 MPa Not specified
Yield Strength >=390 MPa Not specified
Elongation >=18% Not specified
Hardness <=277 HB Not specified
Condition Solution heat treated plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS329J1
Cold-rolled stainless steel plates, sheet and strip
EN 10088-1 X5CrNiMo17-12-2
Marine, chemical, pharmaceutical equipment
Key Differences
Can JIS G4305 SUS329J1 Be Substituted With EN 10088-1 X5CrNiMo17-12-2?
JIS G4305 SUS329J1 and EN 10088-1 X5CrNiMo17-12-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4305 SUS329J1
No active listings currently.
EN 10088-1 X5CrNiMo17-12-2
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3200–5600 mm (125.98–220.47 in)
On M-EX Right Now
JIS G4305 SUS329J1
0 active listings and RFQs →
EN 10088-1 X5CrNiMo17-12-2
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS329J1 and EN 10088-1 X5CrNiMo17-12-2?
EN 10088-1 X5CrNiMo17-12-2 specifies N which is not specified for JIS G4305 SUS329J1.
Can JIS G4305 SUS329J1 be substituted with EN 10088-1 X5CrNiMo17-12-2?
JIS G4305 SUS329J1 and EN 10088-1 X5CrNiMo17-12-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.