Post Stock Login Register

JIS G4305 SUS410 vs BS 970 (Part 1) 410S21

Strong Match — 91.7% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS410 (JIS G4305:2012) and BS 970 (Part 1) 410S21 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS410 is typically used for cold-rolled stainless steel plates, sheet and strip, while BS 970 (Part 1) 410S21 is commonly used for stainless and heat resisting steel for mechanical and allied engineering purposes (table 13).. JIS G4305 SUS410 is defined under Japanese Industrial Standards (JIS), originating from Japan, while BS 970 (Part 1) 410S21 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, JIS G4305 SUS410 vs BS 970 (Part 1) 410S21 is a 91.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 91.7%.

Frequently Compared With JIS G4305 SUS410:
EN 10088-1 1.4006 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .- EN 10088-1 1.4301 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
91.7%
MECHANICAL MATCH
No shared data
OVERALL
91.7%
Specifications
Property JIS G4305 SUS410 BS 970 (Part 1) 410S21
Standard JIS G4305:2012 BS 970 (Part 1):1983
Category Stainless Steel Stainless Steel
C (%) <=0.15 0.09-0.15
Si (%) <=1.00 <=1.0
Mn (%) <=1.00 <=1.0
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Cr (%) 11.50-13.50 11.5-13.5
Ni (%) <=0.60 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS410 BS 970 (Part 1) 410S21
Tensile Strength >=440 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=20% Not specified
Hardness <=201 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS410
Cold-rolled stainless steel plates, sheet and strip
BS 970 (Part 1) 410S21
Stainless and heat resisting steel for mechanical and allied engineering purposes (Table 13).
Can JIS G4305 SUS410 Be Substituted With BS 970 (Part 1) 410S21?
JIS G4305 SUS410 and BS 970 (Part 1) 410S21 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 410S21 is often considered as a substitute for JIS G4305 SUS410 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
JIS G4305 SUS410
0 active listings and RFQs →
BS 970 (Part 1) 410S21
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS410 and BS 970 (Part 1) 410S21?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS410 be substituted with BS 970 (Part 1) 410S21?
JIS G4305 SUS410 and BS 970 (Part 1) 410S21 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 410S21 is often considered as a substitute for JIS G4305 SUS410 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.