Strong Match — 96% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS430 (JIS G4305:2012) and BS 970 EN60 (BS 970:1955) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS430 is typically used for cold-rolled stainless steel plates, sheet and strip, while BS 970 EN60 is commonly used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars..
JIS G4305 SUS430 is defined under Japanese Industrial Standards (JIS), originating from Japan, while BS 970 EN60 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, JIS G4305 SUS430 vs BS 970 EN60 is a 96% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 96%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS430
BS 970 EN60
Tensile Strength
>=420 MPa
Not specified
Yield Strength
>=205 MPa
Not specified
Elongation
>=22%
Not specified
Hardness
<=183 HB
Not specified
Condition
Annealed plate and strip; proof strength applies only when specified by the purchaser
Not specified
Typical Applications
JIS G4305 SUS430
Cold-rolled stainless steel plates, sheet and strip
BS 970 EN60
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
Can JIS G4305 SUS430 Be Substituted With BS 970 EN60?
JIS G4305 SUS430 and BS 970 EN60 overlap closely enough on chemistry and mechanical properties that BS 970 EN60 is often considered as a substitute for JIS G4305 SUS430 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between JIS G4305 SUS430 and BS 970 EN60?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS430 be substituted with BS 970 EN60?
JIS G4305 SUS430 and BS 970 EN60 overlap closely enough on chemistry and mechanical properties that BS 970 EN60 is often considered as a substitute for JIS G4305 SUS430 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.