Post Stock Login Register

JIS G4305 SUS447J1 vs ASTM A959 XM-27

Close Alternative — 82.4% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS447J1 (JIS G4305:2012) and ASTM A959 XM-27 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS447J1 is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A959 XM-27 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). JIS G4305 SUS447J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 XM-27 is defined under ASTM International, originating from United States.

As per chemical composition, JIS G4305 SUS447J1 vs ASTM A959 XM-27 is a 82.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 82.4%.

Frequently Compared With JIS G4305 SUS447J1:
ASTM A959 29-4-2 GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 29-4 ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
82.4%
MECHANICAL MATCH
No shared data
OVERALL
82.4%
Specifications
Property JIS G4305 SUS447J1 ASTM A959 XM-27
Standard JIS G4305:2012 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.010
Si (%) <=0.40 <=0.40
Mn (%) <=0.40 <=0.40
P (%) <=0.030 <=0.020
S (%) <=0.020 <=0.020
Cr (%) 28.50-32.00 25.0-27.5
Mo (%) 1.50-2.50 0.75-1.50
N (%) <=0.015 <=0.015
Ni (%) <=0.50 <=0.50
Cu (%) <=0.20 <=0.20
Cb (%) Not specified 0.05-0.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS447J1 ASTM A959 XM-27
Tensile Strength >=450 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=22% Not specified
Hardness <=207 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS447J1
Cold-rolled stainless steel plates, sheet and strip
ASTM A959 XM-27
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can JIS G4305 SUS447J1 Be Substituted With ASTM A959 XM-27?
JIS G4305 SUS447J1 and ASTM A959 XM-27 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
JIS G4305 SUS447J1
0 active listings and RFQs →
ASTM A959 XM-27
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS447J1 and ASTM A959 XM-27?
ASTM A959 XM-27 specifies Cb which is not specified for JIS G4305 SUS447J1.
Can JIS G4305 SUS447J1 be substituted with ASTM A959 XM-27?
JIS G4305 SUS447J1 and ASTM A959 XM-27 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.