Post Stock Login Register

JIS G4305 SUS447J1 vs EN 10088-1 X2CrMoSiS18-2-1

Related Material — 65.9% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS447J1 (JIS G4305:2012) and EN 10088-1 X2CrMoSiS18-2-1 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS447J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 X2CrMoSiS18-2-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4305 SUS447J1 vs EN 10088-1 X2CrMoSiS18-2-1 is a 65.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65.9%.

Frequently Compared With JIS G4305 SUS447J1:
ASTM A959 29-4-2 GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH ASTM A959 29-4 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
65.9%
MECHANICAL MATCH
No shared data
OVERALL
65.9%
Specifications
Property JIS G4305 SUS447J1 EN 10088-1 X2CrMoSiS18-2-1
Standard JIS G4305:2012 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.030
Si (%) <=0.40 <=2.50
Mn (%) <=0.40 <=1.00
P (%) <=0.030 <=0.040
S (%) <=0.020 0.15-0.35
Cr (%) 28.50-32.00 17.5-19.5
Mo (%) 1.50-2.50 1.50-2.50
N (%) <=0.015 Not specified
Ni (%) <=0.50 <=0.75
Cu (%) <=0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS447J1 EN 10088-1 X2CrMoSiS18-2-1
Tensile Strength >=450 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=22% Not specified
Hardness <=207 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS447J1
Cold-rolled stainless steel plates, sheet and strip
EN 10088-1 X2CrMoSiS18-2-1
Not documented
Key Differences
Can JIS G4305 SUS447J1 Be Substituted With EN 10088-1 X2CrMoSiS18-2-1?
JIS G4305 SUS447J1 and EN 10088-1 X2CrMoSiS18-2-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
JIS G4305 SUS447J1
0 active listings and RFQs →
EN 10088-1 X2CrMoSiS18-2-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS447J1 and EN 10088-1 X2CrMoSiS18-2-1?
JIS G4305 SUS447J1 specifies N, Cu which are not specified for EN 10088-1 X2CrMoSiS18-2-1.
Can JIS G4305 SUS447J1 be substituted with EN 10088-1 X2CrMoSiS18-2-1?
JIS G4305 SUS447J1 and EN 10088-1 X2CrMoSiS18-2-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.