Strong Match — 86.8% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS890L (JIS G4305:2012) and ASTM A276/A276M N08904 (ASTM A276/A276M:2017) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS890L is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A276/A276M N08904 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished).
JIS G4305 SUS890L is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A276/A276M N08904 is defined under ASTM International, originating from United States.
As per chemical composition, JIS G4305 SUS890L vs ASTM A276/A276M N08904 is a 96.8% match.
As per mechanical properties, the match is 66.7%.
Combined, this makes them a strong match overall at 86.8%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS890L
ASTM A276/A276M N08904
Tensile Strength
>=490 MPa
>=490 MPa
Yield Strength
>=215 MPa
>=220 MPa
Elongation
>=35%
>=35%
Hardness
<=187 HB
Not specified
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
JIS G4305 SUS890L
Cold-rolled stainless steel plates, sheet and strip
ASTM A276/A276M N08904
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
ASTM A276/A276M N08904 specifies N which is not specified for JIS G4305 SUS890L.
Can JIS G4305 SUS890L Be Substituted With ASTM A276/A276M N08904?
JIS G4305 SUS890L and ASTM A276/A276M N08904 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M N08904 is often considered as a substitute for JIS G4305 SUS890L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between JIS G4305 SUS890L and ASTM A276/A276M N08904?
ASTM A276/A276M N08904 specifies N which is not specified for JIS G4305 SUS890L.
Can JIS G4305 SUS890L be substituted with ASTM A276/A276M N08904?
JIS G4305 SUS890L and ASTM A276/A276M N08904 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M N08904 is often considered as a substitute for JIS G4305 SUS890L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.