Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUSXM15J1 (JIS G4305:2012) and ASTM A959 SS310 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUSXM15J1 is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A959 SS310 is commonly used for furnace parts, heat exchangers, kiln components.
JIS G4305 SUSXM15J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 SS310 is defined under ASTM International, originating from United States.
As per chemical composition, JIS G4305 SUSXM15J1 vs ASTM A959 SS310 is a 72.1% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUSXM15J1
ASTM A959 SS310
Tensile Strength
>=520 MPa
Not specified
Yield Strength
>=205 MPa
Not specified
Elongation
>=40%
Not specified
Hardness
<=207 HB
Not specified
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Not specified
Typical Applications
JIS G4305 SUSXM15J1
Cold-rolled stainless steel plates, sheet and strip
ASTM A959 SS310
Furnace parts, heat exchangers, kiln components
Can JIS G4305 SUSXM15J1 Be Substituted With ASTM A959 SS310?
JIS G4305 SUSXM15J1 and ASTM A959 SS310 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4305 SUSXM15J1 and ASTM A959 SS310?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUSXM15J1 be substituted with ASTM A959 SS310?
JIS G4305 SUSXM15J1 and ASTM A959 SS310 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.