Post Stock Login Register

JIS G4404 SKD11 vs IS 1570 (Part 4) XT160Cr48

Related Material — 65% match based on chemical composition and mechanical property overlap.

JIS G4404 SKD11 (JIS G4404:2006) and IS 1570 (Part 4) XT160Cr48 (IS 1570 (Part 4):1988) are both steel grades. JIS G4404 SKD11 is classified under Tool & Die Steels, while IS 1570 (Part 4) XT160Cr48 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. JIS G4404 SKD11 is defined under Japanese Industrial Standards (JIS), originating from Japan, while IS 1570 (Part 4) XT160Cr48 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, JIS G4404 SKD11 vs IS 1570 (Part 4) XT160Cr48 is a 77.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With JIS G4404 SKD11:
EN ISO 683-17 100Cr6 GB/T 1299 4Cr5MoSiV1 GB/T 1299 4Cr5MoSiV EN ISO 4957 1.2316 GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2379 DIN EN ISO 4957 1.2344 GB/T 1299 3Cr2W8V GOST 5950 4H5MFS AISI 52100 IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
77.9%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property JIS G4404 SKD11 IS 1570 (Part 4) XT160Cr48
Standard JIS G4404:2006 IS 1570 (Part 4):1988
Category Tool & Die Steels Alloy Steel
C (%) 1.40-1.60 1.50-1.70
Si (%) <=0.40 0.10-0.35
Mn (%) <=0.60 0.25-0.50
Cr (%) 11.00-13.00 11.0-13.0
Mo (%) 0.80-1.20 <=0.80
V (%) 0.20-0.50 <=0.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4404 SKD11 IS 1570 (Part 4) XT160Cr48
Hardness HRC (hardened) 58-62 Not specified
Hardness HB (annealed) <=255 Not specified
Typical Applications
JIS G4404 SKD11
Precision blanking dies, cold forming tools, gauges
IS 1570 (Part 4) XT160Cr48
Not documented
Key Differences
Can JIS G4404 SKD11 Be Substituted With IS 1570 (Part 4) XT160Cr48?
JIS G4404 SKD11 and IS 1570 (Part 4) XT160Cr48 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4404 SKD11
Round Bar → (3 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–3000 mm (98.43–118.11 in)
IS 1570 (Part 4) XT160Cr48
No active listings currently.
On M-EX Right Now
JIS G4404 SKD11
3 active listings and RFQs →
IS 1570 (Part 4) XT160Cr48
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4404 SKD11 and IS 1570 (Part 4) XT160Cr48?
Different category: JIS G4404 SKD11 is Tool & Die Steels, IS 1570 (Part 4) XT160Cr48 is Alloy Steel.
Can JIS G4404 SKD11 be substituted with IS 1570 (Part 4) XT160Cr48?
JIS G4404 SKD11 and IS 1570 (Part 4) XT160Cr48 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.