Post Stock Login Register

JIS G4404 SKD61 vs GB/T 1299 4Cr5MoSiV1

Related Material — 60.2% match based on chemical composition and mechanical property overlap.

JIS G4404 SKD61 (JIS G4404:2006) and GB/T 1299 4Cr5MoSiV1 (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. JIS G4404 SKD61 is typically used for die casting dies, extrusion tooling, forging tools, while GB/T 1299 4Cr5MoSiV1 is commonly used for die casting dies, forging dies, extrusion tools. JIS G4404 SKD61 is defined under Japanese Industrial Standards (JIS), originating from Japan, while GB/T 1299 4Cr5MoSiV1 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, JIS G4404 SKD61 vs GB/T 1299 4Cr5MoSiV1 is a 90.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 60.2%.

Frequently Compared With JIS G4404 SKD61:
DIN EN ISO 4957 1.2344 EN ISO 683-17 100Cr6 EN ISO 4957 1.2316 GOST 5950 4H5MFS AISI 52100 GB/T 1299 3Cr2W8V GB/T 1299 4Cr5MoSiV GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2379 GOST 5950 3H2W8F IS 3748 103T3 IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
90.3%
MECHANICAL MATCH
0%
OVERALL
60.2%
Specifications
Property JIS G4404 SKD61 GB/T 1299 4Cr5MoSiV1
Standard JIS G4404:2006 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 0.32-0.42 0.32–0.45
Si (%) 0.80-1.20 0.80–1.20
Mn (%) 0.25-0.50 0.20–0.50
Cr (%) 4.50-5.50 4.75–5.50
Mo (%) 1.00-1.50 1.20–1.75
V (%) 0.80-1.20 0.80–1.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4404 SKD61 GB/T 1299 4Cr5MoSiV1
Hardness HRC (hardened) 44-54 42–54
Hardness HB (annealed) <=229 ≤235
Typical Applications
JIS G4404 SKD61
Die casting dies, extrusion tooling, forging tools
GB/T 1299 4Cr5MoSiV1
Die casting dies, forging dies, extrusion tools
Can JIS G4404 SKD61 Be Substituted With GB/T 1299 4Cr5MoSiV1?
JIS G4404 SKD61 and GB/T 1299 4Cr5MoSiV1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4404 SKD61
Round Bar → (3 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–4200 mm (98.43–165.35 in)
GB/T 1299 4Cr5MoSiV1
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2700–4100 mm (106.3–161.42 in)
On M-EX Right Now
JIS G4404 SKD61
3 active listings and RFQs →
GB/T 1299 4Cr5MoSiV1
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4404 SKD61 and GB/T 1299 4Cr5MoSiV1?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4404 SKD61 be substituted with GB/T 1299 4Cr5MoSiV1?
JIS G4404 SKD61 and GB/T 1299 4Cr5MoSiV1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.