Minimal Match — 50.2% match
based on chemical composition and mechanical property overlap.
JIS G4404 SKS93 (JIS G4404:2006) and AISI 52100 are both steel grades.
Both fall under the Tool & Die Steels category.
JIS G4404 SKS93 is typically used for cold working molds, press dies, blanking dies, shear blades, gauges, jigs., while AISI 52100 is commonly used for anti-friction bearings, ball screws, precision rollers.
JIS G4404 SKS93 is defined under Japanese Industrial Standards (JIS), originating from Japan, while AISI 52100 is defined under AISI, originating from United States.
As per chemical composition, JIS G4404 SKS93 vs AISI 52100 is a 75.4% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 50.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can JIS G4404 SKS93 Be Substituted With AISI 52100?
JIS G4404 SKS93 and AISI 52100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4404 SKS93 and AISI 52100?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4404 SKS93 be substituted with AISI 52100?
JIS G4404 SKS93 and AISI 52100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.