Post Stock Login Register

JIS G4804 SUM22L vs EN 10087 11SMnPb30

Strong Match — 91.1% match based on chemical composition and mechanical property overlap.

JIS G4804 SUM22L (JIS G 4804:2021) and EN 10087 11SMnPb30 (EN 10087:1998) are both steel grades. Both fall under the Free Machining Steel category. JIS G4804 SUM22L is typically used for complex precision turned parts, high speed machining, while EN 10087 11SMnPb30 is commonly used for complex turned parts requiring excellent surface finish. JIS G4804 SUM22L is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10087 11SMnPb30 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4804 SUM22L vs EN 10087 11SMnPb30 is a 86.7% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 91.1%.

Frequently Compared With JIS G4804 SUM22L:
SAE J403 1141 IS 1570 (Part 3) 10C8S10 SAE J403 1117 SAE J403 1126 IS 4432 10C8S10 SAE J403 1117 SAE J403 1117 SAE J403 1118 SAE J403 1118 SAE J403 1118 SAE J403 1126 SAE J403 1126
Match Breakdown
CHEMISTRY MATCH
86.7%
MECHANICAL MATCH
100%
OVERALL
91.1%
Specifications
Property JIS G4804 SUM22L EN 10087 11SMnPb30
Standard JIS G 4804:2021 EN 10087:1998
Category Free Machining Steel Free Machining Steel
C (%) ≤0.13 ≤0.14
Mn (%) 0.70–1.00 0.90–1.30
S (%) 0.24–0.33 0.27–0.33
P (%) 0.07–0.12 Not specified
Pb (%) 0.10–0.35 0.20–0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4804 SUM22L EN 10087 11SMnPb30
Tensile Strength 380–490 MPa 380–570 MPa
Hardness ≤149 HB Not specified
Elongation Not specified ≥6%
Typical Applications
JIS G4804 SUM22L
Complex precision turned parts, high speed machining
EN 10087 11SMnPb30
Complex turned parts requiring excellent surface finish
Key Differences
Can JIS G4804 SUM22L Be Substituted With EN 10087 11SMnPb30?
JIS G4804 SUM22L and EN 10087 11SMnPb30 overlap closely enough on chemistry and mechanical properties that EN 10087 11SMnPb30 is often considered as a substitute for JIS G4804 SUM22L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
JIS G4804 SUM22L
Hex Bar → (2 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2500–2700 mm (98.43–106.3 in)
EN 10087 11SMnPb30
Hex Bar → (3 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2800–5300 mm (110.24–208.66 in)
On M-EX Right Now
JIS G4804 SUM22L
2 active listings and RFQs →
EN 10087 11SMnPb30
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4804 SUM22L and EN 10087 11SMnPb30?
JIS G4804 SUM22L specifies P which is not specified for EN 10087 11SMnPb30.
Can JIS G4804 SUM22L be substituted with EN 10087 11SMnPb30?
JIS G4804 SUM22L and EN 10087 11SMnPb30 overlap closely enough on chemistry and mechanical properties that EN 10087 11SMnPb30 is often considered as a substitute for JIS G4804 SUM22L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.