Post Stock Login Register

JIS G4804 SUM22L vs JIS G4804 SUM22

Strong Match — 96.7% match based on chemical composition and mechanical property overlap.

JIS G4804 SUM22L (JIS G 4804:2021) and JIS G4804 SUM22 (JIS G 4804:2021) are both steel grades. Both fall under the Free Machining Steel category. JIS G4804 SUM22L is typically used for complex precision turned parts, high speed machining, while JIS G4804 SUM22 is commonly used for screw machine parts, bolts, studs, pins. JIS G4804 SUM22L is defined under Japanese Industrial Standards (JIS), originating from Japan, while JIS G4804 SUM22 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, JIS G4804 SUM22L vs JIS G4804 SUM22 is a 95.1% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 96.7%.

Frequently Compared With JIS G4804 SUM22L:
SAE J403 1141 IS 1570 (Part 3) 10C8S10 SAE J403 1117 SAE J403 1126 IS 4432 10C8S10 SAE J403 1117 SAE J403 1117 SAE J403 1118 SAE J403 1118 SAE J403 1118 SAE J403 1126 SAE J403 1126
Match Breakdown
CHEMISTRY MATCH
95.1%
MECHANICAL MATCH
100%
OVERALL
96.7%
Specifications
Property JIS G4804 SUM22L JIS G4804 SUM22
Standard JIS G 4804:2021 JIS G 4804:2021
Category Free Machining Steel Free Machining Steel
C (%) ≤0.13 ≤0.13
Mn (%) 0.70–1.00 0.70–1.00
S (%) 0.24–0.33 0.24–0.33
P (%) 0.07–0.12 0.07–0.12
Pb (%) 0.10–0.35 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4804 SUM22L JIS G4804 SUM22
Tensile Strength 380–490 MPa 380–490 MPa
Hardness ≤149 HB ≤149 HB
Typical Applications
JIS G4804 SUM22L
Complex precision turned parts, high speed machining
JIS G4804 SUM22
Screw machine parts, bolts, studs, pins
Key Differences
Can JIS G4804 SUM22L Be Substituted With JIS G4804 SUM22?
JIS G4804 SUM22L and JIS G4804 SUM22 overlap closely enough on chemistry and mechanical properties that JIS G4804 SUM22 is often considered as a substitute for JIS G4804 SUM22L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
JIS G4804 SUM22L
Hex Bar → (2 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2500–2700 mm (98.43–106.3 in)
JIS G4804 SUM22
Hex Bar → (2 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2500–3300 mm (98.43–129.92 in)
On M-EX Right Now
JIS G4804 SUM22L
2 active listings and RFQs →
JIS G4804 SUM22
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4804 SUM22L and JIS G4804 SUM22?
JIS G4804 SUM22L specifies Pb which is not specified for JIS G4804 SUM22.
Can JIS G4804 SUM22L be substituted with JIS G4804 SUM22?
JIS G4804 SUM22L and JIS G4804 SUM22 overlap closely enough on chemistry and mechanical properties that JIS G4804 SUM22 is often considered as a substitute for JIS G4804 SUM22L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.