Post Stock Login Register

JIS G4804 SUM24L vs AISI 1213

Related Material — 57% match based on chemical composition and mechanical property overlap.

JIS G4804 SUM24L (JIS G 4804:2021) and AISI 1213 are both steel grades. Both fall under the Free Machining Steel category. JIS G4804 SUM24L is typically used for precision components, automatic lathe work, while AISI 1213 is commonly used for screw machine products, bolts, studs. JIS G4804 SUM24L is defined under Japanese Industrial Standards (JIS), originating from Japan, while AISI 1213 is defined under AISI, originating from United States.

As per chemical composition, JIS G4804 SUM24L vs AISI 1213 is a 85.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 57%.

Frequently Compared With JIS G4804 SUM24L:
SAE J403 1141 SAE J403 1118 SAE J403 1117 SAE J403 1118 SAE J403 1126 IS 1570 (Part 3) 10C8S10 IS 4432 10C8S10 SAE J403 1117 SAE J403 1126 SAE J403 1132 SAE J403 1117 SAE J403 1126
Match Breakdown
CHEMISTRY MATCH
85.6%
MECHANICAL MATCH
0%
OVERALL
57%
Specifications
Property JIS G4804 SUM24L AISI 1213
Standard JIS G 4804:2021 AISI
Category Free Machining Steel Free Machining Steel
C (%) ≤0.15 ≤0.13
Mn (%) 0.85–1.15 0.70–1.00
S (%) 0.26–0.35 0.24–0.33
P (%) 0.04–0.09 0.07–0.12
Pb (%) 0.10–0.35 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4804 SUM24L AISI 1213
Tensile Strength 390–510 MPa 380–490 MPa
Hardness ≤163 HB ≤149 HB
Elongation Not specified ≥10%
Typical Applications
JIS G4804 SUM24L
Precision components, automatic lathe work
AISI 1213
Screw machine products, bolts, studs
Key Differences
Can JIS G4804 SUM24L Be Substituted With AISI 1213?
JIS G4804 SUM24L and AISI 1213 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4804 SUM24L
Hex Bar → (2 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2500–3500 mm (98.43–137.8 in)
AISI 1213
Hex Bar → (3 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 3300–4600 mm (129.92–181.1 in)
On M-EX Right Now
JIS G4804 SUM24L
2 active listings and RFQs →
AISI 1213
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4804 SUM24L and AISI 1213?
JIS G4804 SUM24L specifies Pb which is not specified for AISI 1213.
Can JIS G4804 SUM24L be substituted with AISI 1213?
JIS G4804 SUM24L and AISI 1213 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.