Post Stock Login Register

KS D3752 SM20C vs SAE J403 1023

Strong Match — 88.5% match based on chemical composition and mechanical property overlap.

KS D3752 SM20C (KS D 3752:2024) and SAE J403 1023 (SAE J403:2009) are both steel grades. Both fall under the Carbon Steel category. KS D3752 SM20C is typically used for shafts, pins, keys, bolts, lightly stressed structural components, general engineering parts, while SAE J403 1023 is commonly used for chemistry-only grade; product scope as listed in the composition notes. KS D3752 SM20C is defined under Korean Industrial Standards (KS), originating from South Korea, while SAE J403 1023 is defined under SAE International, originating from United States.

As per chemical composition, KS D3752 SM20C vs SAE J403 1023 is a 88.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.5%.

Frequently Compared With KS D3752 SM20C:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M20 BS 970 (Part 1) 045A10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15
Match Breakdown
CHEMISTRY MATCH
88.5%
MECHANICAL MATCH
No shared data
OVERALL
88.5%
Specifications
Property KS D3752 SM20C SAE J403 1023
Standard KS D 3752:2024 SAE J403:2009
Category Carbon Steel Carbon Steel
C (%) 0.18-0.23 0.20-0.25
Si (%) 0.15-0.35 Not specified
Mn (%) 0.30-0.60 0.30-0.60
S (%) <=0.035 <=0.050
P (%) <=0.030 <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property KS D3752 SM20C SAE J403 1023
Tensile Strength u2265440 MPa Not specified
Yield Strength u2265245 MPa Not specified
Elongation u226523% Not specified
Hardness u2264149 HB Not specified
Typical Applications
KS D3752 SM20C
Shafts, pins, keys, bolts, lightly stressed structural components, general engineering parts
SAE J403 1023
Chemistry-only grade; product scope as listed in the composition notes
Key Differences
Can KS D3752 SM20C Be Substituted With SAE J403 1023?
KS D3752 SM20C and SAE J403 1023 overlap closely enough on chemistry and mechanical properties that SAE J403 1023 is often considered as a substitute for KS D3752 SM20C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
KS D3752 SM20C
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4200–5900 mm (165.35–232.28 in)
SAE J403 1023
No active listings currently.
On M-EX Right Now
KS D3752 SM20C
2 active listings and RFQs →
SAE J403 1023
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between KS D3752 SM20C and SAE J403 1023?
KS D3752 SM20C specifies Si which is not specified for SAE J403 1023.
Can KS D3752 SM20C be substituted with SAE J403 1023?
KS D3752 SM20C and SAE J403 1023 overlap closely enough on chemistry and mechanical properties that SAE J403 1023 is often considered as a substitute for KS D3752 SM20C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.