Post Stock Login Register

KS D 3753 STS3 vs IS 1570 (Part 6) T140W15Cr2

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

KS D 3753 STS3 (KS D 3753:2023) and IS 1570 (Part 6) T140W15Cr2 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. KS D 3753 STS3 is defined under Korean Industrial Standards (KS), originating from South Korea, while IS 1570 (Part 6) T140W15Cr2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, KS D 3753 STS3 vs IS 1570 (Part 6) T140W15Cr2 is a 73.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With KS D 3753 STS3:
DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 EN ISO 683-17 100Cr6 AISI 52100 DIN EN ISO 4957 1.2379 GB/T 1299 4Cr5MoSiV GOST 5950 4H5MFS1 EN ISO 4957 1.2316 GB/T 1299 3Cr2W8V GOST 5950 3H2W8F GOST 5950 4H5MFS IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
73.8%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property KS D 3753 STS3 IS 1570 (Part 6) T140W15Cr2
Standard KS D 3753:2023 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.80-0.90 1.30-1.50
Si (%) 0.15-0.35 0.10-0.35
Mn (%) 0.30-0.60 0.25-0.50
Cr (%) 0.50-1.00 0.30-0.70
W (%) 0.50-1.00 3.50-4.20
P (%) 0.030 max <=0.035
S (%) 0.030 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property KS D 3753 STS3 IS 1570 (Part 6) T140W15Cr2
Tensile Strength 880-1100 MPa Not specified
Yield Strength 700 MPa min Not specified
Elongation 10% min Not specified
Hardness 56-60 HRC Not specified
Typical Applications
KS D 3753 STS3
Used in chisels, punches, dies, shear tools, gauges, and hand tools.
IS 1570 (Part 6) T140W15Cr2
Not documented
Can KS D 3753 STS3 Be Substituted With IS 1570 (Part 6) T140W15Cr2?
KS D 3753 STS3 and IS 1570 (Part 6) T140W15Cr2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
KS D 3753 STS3
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–2600 mm (98.43–102.36 in)
IS 1570 (Part 6) T140W15Cr2
No active listings currently.
On M-EX Right Now
KS D 3753 STS3
2 active listings and RFQs →
IS 1570 (Part 6) T140W15Cr2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between KS D 3753 STS3 and IS 1570 (Part 6) T140W15Cr2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can KS D 3753 STS3 be substituted with IS 1570 (Part 6) T140W15Cr2?
KS D 3753 STS3 and IS 1570 (Part 6) T140W15Cr2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.