Strong Match — 95.2% match
based on chemical composition and mechanical property overlap.
KS D3867 SCM440 (KS D 3867:2025) and SS 14 22 44 2244 are both steel grades.
Both fall under the Alloy Steel category.
KS D3867 SCM440 is typically used for shafts,gears,axles,bolts,automotive parts,machine components,spindles,hydraulic parts, while SS 14 22 44 2244 is commonly used for shafts,gears,axles,bolts,forgings,automotive parts,machine components.
KS D3867 SCM440 is defined under Korean Industrial Standards (KS), originating from South Korea, while SS 14 22 44 2244 is defined under Swedish Standards (SS), originating from Sweden.
As per chemical composition, KS D3867 SCM440 vs SS 14 22 44 2244 is a 92.9% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 95.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
KS D3867 SCM440
SS 14 22 44 2244
Tensile Strength
900-1100 MPa
900-1100 MPa
Yield Strength
700-900 MPa
700-900 MPa
Elongation
11-16 %
11-16 %
Hardness
248-320 HB
248-320 HB
Typical Applications
KS D3867 SCM440
shafts,gears,axles,bolts,automotive parts,machine components,spindles,hydraulic parts
Can KS D3867 SCM440 Be Substituted With SS 14 22 44 2244?
KS D3867 SCM440 and SS 14 22 44 2244 overlap closely enough on chemistry and mechanical properties that SS 14 22 44 2244 is often considered as a substitute for KS D3867 SCM440 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between KS D3867 SCM440 and SS 14 22 44 2244?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can KS D3867 SCM440 be substituted with SS 14 22 44 2244?
KS D3867 SCM440 and SS 14 22 44 2244 overlap closely enough on chemistry and mechanical properties that SS 14 22 44 2244 is often considered as a substitute for KS D3867 SCM440 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.