Post Stock Login Register

NF A35-552 34NCD6 vs IS 4367 07Cr4Mo6

Minimal Match — 40.2% match based on chemical composition and mechanical property overlap.

NF A35-552 34NCD6 (NF A35-552:1986) and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. NF A35-552 34NCD6 is defined under Association Francaise de Normalisation (NF), originating from France, while IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, NF A35-552 34NCD6 vs IS 4367 07Cr4Mo6 is a 60.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 40.2%.

Frequently Compared With NF A35-552 34NCD6:
UNI 11234 100Cr6 NF A35-565 100C6 GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
60.3%
MECHANICAL MATCH
0%
OVERALL
40.2%
Specifications
Property NF A35-552 34NCD6 IS 4367 07Cr4Mo6
Standard NF A35-552:1986 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.30-0.38 <=0.12
Si (%) 0.15-0.40 0.15-0.60
Mn (%) 0.50-0.80 0.40-0.70
Ni (%) 1.30-1.70 <=0.30
Cr (%) 1.30-1.70 0.70-1.10
Mo (%) 0.15-0.30 0.45-0.65
P (%) 0.035 max <=0.035
S (%) 0.035 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property NF A35-552 34NCD6 IS 4367 07Cr4Mo6
Tensile Strength 900-1100 MPa 380-550 MPa
Yield Strength 700-850 MPa 225 MPa min
Elongation 10-14% >=19%
Hardness 270-340 HB Not specified
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Condition Not specified Normalised and tempered, ruling section up to 40 mm
Typical Applications
NF A35-552 34NCD6
Used for aircraft parts, transmission shafts, gears, crankshafts, connecting rods, and heavy-duty fasteners.
IS 4367 07Cr4Mo6
Not documented
Can NF A35-552 34NCD6 Be Substituted With IS 4367 07Cr4Mo6?
NF A35-552 34NCD6 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
NF A35-552 34NCD6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5000–7000 mm (196.85–275.59 in)
IS 4367 07Cr4Mo6
No active listings currently.
On M-EX Right Now
NF A35-552 34NCD6
2 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between NF A35-552 34NCD6 and IS 4367 07Cr4Mo6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can NF A35-552 34NCD6 be substituted with IS 4367 07Cr4Mo6?
NF A35-552 34NCD6 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.